Multiwalled Carbon Nanotubes
Mostrando 1-12 de 81 artigos, teses e dissertações.
-
1. Study of nanocomposites with carbon nanotubes and their tendency for carbon organization
Abstract The carbon derived from the thermal treatment of modified phenolic resins (PR) tends to organize into graphitic lamellae or turbostratic carbon and is commonly considered non-graphitizable. In this study, nanocomposites were synthesized with modified phenolic resin (Novolac) used as the matrix and oxidized multi-walled carbon nanotubes (NTox) in amo
Cerâmica. Publicado em: 2022
-
2. Dispersive Solid-Phase Extraction Using 3-Mercaptopropyltrimethoxysilane Functionalized Magnetic MWCNT-Based Nanocomposite for Selective and Efficient Preconcentration of Pb2+ with FAAS Determination
A novel nanocomposite based on magnetic multiwalled carbon nanotubes coated with SiO2 and functionalized with 3-mercaptopropyltrimethoxysilane (3-MPTMS) was prepared for the efficient extraction and quantification of lead ions from water samples. The adsorption capacity of this adsorbent could reach 1.995 mg g-1 Pb2+ in an equilibrium time of 30 min. Under o
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
3. Tópicos Emergentes em Insuficiência Cardíaca: Terapias Intervencionistas na Insuficiência Cardíaca
In this paper a novel supramolecular strategy to improve the efficiency of a voltammetric sensor to determine two biologically relevant molecules (epinephrine (EP) and uric acid (UA)) is presented. The strategy is based on the use of a glassy carbon electrode modified with a copper(II) complex ([Cu(H2dimpy)Cl]PF6) adsorbed on multi-walled carbon nanotubes (M
Arq. Bras. Cardiol.. Publicado em: 2020-11
-
4. Synergistic Supramolecular Effect on the Electro-Oxidation of Biological Relevant Molecules: A Novel Sensor for Simultaneous Determination of Epinephrine and Uric Acid in Human Urine Using MWCNT and a Copper(II) Complex
In this paper a novel supramolecular strategy to improve the efficiency of a voltammetric sensor to determine two biologically relevant molecules (epinephrine (EP) and uric acid (UA)) is presented. The strategy is based on the use of a glassy carbon electrode modified with a copper(II) complex ([Cu(H2dimpy)Cl]PF6) adsorbed on multi-walled carbon nanotubes (M
J. Braz. Chem. Soc.. Publicado em: 2020-11
-
5. Evaluation of Carbon Nanotubes/Polyaniline Thin Films for Development of Electrochemical Sensors
Thin films of multiwalled carbon nanotubes/polyaniline nanocomposites (CNT/PAni) were synthesized through the liquid/liquid (L/L) interfacial route, deposited over glass substrates, and evaluated through cyclic voltammetry and amperometry as electrochemical sensor, using L-ascorbic acid as probe. Films with three different CNT/PAni ratios have been prepared.
J. Braz. Chem. Soc.. Publicado em: 2020-06
-
6. New Detector Based on Composite of Carbon Nanotubes with Nanoparticles of Cobalt Oxide for Carbohydrates Analysis by HPLC with Reverse Pulsed Amperometric Detection
This work aims to present an alternative detector for the determination of arabinose, galactose, glucose and xylose in hydrolyzed sugarcane bagasse. The detector was developed using an electrode modified with multi-walled carbon nanotubes containing cobalt oxide nanoparticles (GCE/MWCNT/CoOOH) applied in high-performance liquid chromatography (HPLC) with rev
J. Braz. Chem. Soc.. Publicado em: 2020-03
-
7. CATALYST PREPARATION METHODS TO REDUCE CONTAMINANTS IN A HIGH-YIELD PURIFICATION PROCESS OF MULTIWALLED CARBON NANOTUBES
Abstract CoMo/MgO catalysts with low loading of cobalt and molybdenum were prepared by incipient wetness impregnation and the sol-gel method for high yield production of carbon nanotubes (CNT). A detailed characterization of the catalysts, as-produced CNT and purified CNT, indicated a relationship between carbon nanotube properties, synthesis and purificatio
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
8. STUDY OF THE EFFECT OF FUNCTIONALIZATION OF CARBON NANOTUBES ON GAS SEPARATION
Abstract In order to improve the adsorption capacity and selectivity of CO2/CH4 and CO2/N2, we have functionalized multi-walled carbon nanotubes (MWCNT) with 3-aminopropyltriethoxysilane (APTES). The functionalized MWCNT was characterized by Fourier transform infrared (FT-IR), energy dispersive X-ray spectroscopy (EDX) and BET analysis. CO2, CH4 and N2 adsor
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
9. Improved Functionalization of Multiwalled Carbon Nanotubes in Ultra-Low Acid Volume: Effect of Solid/Liquid Interface
A comprehensive study of a less harmful functionalization of multiwalled carbon nanotubes (MWCNT) was performed. The influence of ultrasonic cavitation and solid/liquid interface was indirectly evaluated by statistical characterization of MWCNT aspect ratio and degree of functionalization. MWCNT aspect ratio was determined through hundreds of electron micros
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
10. Construction and Evaluation of a Graphene Oxide Functionalized Aminopropyltriethoxy Silane Surface Molecularly Imprinted Polymer Potentiometric Sensor for Dipyridamole Detection in Urine and Pharmaceutical Samples
A dipyridamole (DIP) based surface molecularly imprinted polymer (MIP) was synthesized and applied as a sensing agent in a sensing layer of a new modified potentiometric carbon paste electrode (CPE). The potentiometric modified CPEs (GO@SiO2-NH2-MIP/MWCNTs/CPE, where GO is graphene oxide and MWCNTs is multi-walled carbon nanotubes) showed an improved perform
J. Braz. Chem. Soc.. Publicado em: 16/09/2019
-
11. Design and characterization of nanocarriers loaded with Levofloxacin for enhanced antimicrobial activity; physicochemical properties, in vitro release and oral acute toxicity
Inorganic and carbon based nanomaterials are widely used against several diseases, such as cancer, autoimmune diseases as well as fungi and bacteria colonization. In this work, Santa Barbara Amorphous mesoporous silica (SBA), Halloysite Nanotubes (HNTs) and Multiwalled Carbon Nanotubes (CNTs) were loaded with fluoroquinolone Levofloxacin (LVF) to be applied
Braz. J. Pharm. Sci.. Publicado em: 12/08/2019
-
12. Mechanical Behavior of Multiwalled Carbon Nanotube Reinforced 7075 Aluminum Alloy Composites Prepared by Mechanical Milling and Hot Extrusion
In this paper, multiwalled carbon nanotubes (MWCNTs) were synthesized by spray pyrolysis to be used later as material reinforcement in the production of MWCNTs/Al7075 aluminum composites. Both, MWCNTs and MWCNTs/Al7075 composites were microstructurally and mechanically characterized. Scanning electron microscopy (SEM) analysis shows MWCNTs formed by multiple
Mat. Res.. Publicado em: 31/01/2019