Nanocomposite Organoclay
Mostrando 1-9 de 9 artigos, teses e dissertações.
-
1. Effect of an Organo-Modified Montmorillonite on the Barrier Properties of PET Nanocomposites Using a Polyester Ionomer as a Compatibilizing Agent
Poly(ethylene terephthalate)/organically modified montmorillonite (PET/o-Mt) nanocomposites were prepared via melt intercalation in a twin-screw extruder using a polyester ionomer (PETi) as compatibilizer. The o-Mt content used was 0, 1, 3 or 5 wt% and the compatibilizer/o-Mt mass ratio was 0/1, 1/1 or 3/1. The main objective was to study the effects of the
Mat. Res.. Publicado em: 09/05/2017
-
2. Nanocomposites films obtained from protein isolates of mechanically deboned chicken meat added with montmorillonite
Abstract The aim of this study was to evaluate the properties of nanocomposite films of protein isolates from mechanically deboned chicken meat with organoclay (montmorillonite). For the film development, a 23 experimental design was performed with three levels, protein isolate (2, 3.5, 5 g.100 mL-1 of solution), montmorillonite (0.3, 0.5, 0.7 g.100mL-1 of s
Polímeros. Publicado em: 2017-03
-
3. Thermal properties of poly (methyl methacrylate)/organomodified montmorillonite nanocomposites obtained by in situ photopolymerization
The organoclay/poly(methyl methacrylate) (PMMA) nanocomposites were prepared by in situ photopolymerization method using two solvents, ethanol and acetonitrile. The influences of organoclay loading, solvent nature and length of attached surfactant (C8 or C16) on thermal and mechanical properties were studied by thermogravimetric analysis and dynamic mechanic
Mat. Res.. Publicado em: 22/10/2013
-
4. The influence of screw configurations and feed mode on the dispersion of organoclay on PP
The design of the screw configuration as well as the screw speed, the residence time, the feeder type, and the temperature has a large effect on the dispersion of the clay into the matrix and, consequently, on the mechanical and thermal properties of the polymeric matrix. The objective of the present work was to evaluate the influence of two different screw
Polímeros. Publicado em: 19/04/2013
-
5. Influence of processing variables on the mechanical behavior of HDPE/clay nanocomposites
Nanocomposites were processed using the technique of melt intercalation, starting from a concentrated polar compatibilizer/organoclay (PE-g-MA/organoclay) prepared in an internal mixer. The concentrate was incorporated into the matrix of HDPE by two methods: I) counter-rotating twin-screw extruder and II) co-rotating twin-screw extruder, using two screw prof
Materials Research. Publicado em: 31/05/2012
-
6. Tenacificação em Nanocompósitos de Poliamida 6 e Argila / Toughening of polyamide 6 nanocomposites and clay
Nanocompósitos de poliamida 6 (PA6) e montmorilonita modificada com sal de amônio quaternário têm sido estudados, visando melhorar as propriedades térmicas e mecânicas. De fato os efeitos da nano-escala e da interação carga-matriz resultam em maior módulo de elasticidade e resistência à tração, porém a deformação é reduzida. Assim, nesse tra
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 11/06/2010
-
7. Nanocompósitos de elastômero termoplástico à base de PP/EPDM/argila organofílica / Nanocomposites based in PP / EPDM thermoplastic elastomer and organoclay
Neste trabalho foram preparados nanocompósitos de elastômeros termoplásticos à base de PP/EPDM/argila organofílica. Foram utilizados como agentes interfaciais polipropileno e terpolímero de etileno-propileno-dieno ambos modificados com grupos anidrido maleico, PP-MA e EPDM-MA, respectivamente. Dois tipos de argila organofílica, que se diferenciam pela
Publicado em: 2010
-
8. Preparation of organoclays appropriated and development of plasticized pvc nanocomposites / Preparação de argilas organofílicas para o desenvolvimento de nanocompósitos a partir de compostos de PVC plastificado
Nanocomposites of Plasticized PVC with organoclays have a large potential to improve the thermal resistance of PVC as well as its flame retardancy. However, a great problem in the production of PVC nanocomposites is the decomposition of conventional organic ammonium salts incorporated on the clay which can catalyze PVC degradation and lead to deterioration o
Publicado em: 2009
-
9. Desenvolvimento e caracterização de filmes tubulares de nanocompósitos de PEAD/EVA/argila organofílica / Development and characterization of blown films of HDPE/EVA/organophilic clay nanocomposites
In this work, the use of ethylene-vinyl acetate copolymer (EVA) in substitution to compatibility agents normally employed in the production of high density polyethylene (HDPE) nanocomposites (such as polyethylene grafted with maleic anhydride - PEMA) was evaluated due to its intrinsic polarity and relative low cost. Two EVAs with different melt flow indexes
Publicado em: 2008