Nuclear Fuel Elements
Mostrando 1-12 de 12 artigos, teses e dissertações.
-
1. Interdiffusion studies on hot rolled U-10Mo/AA1050
The U-Mo alloys are investigated with the goal to become nuclear material to fabricate high-density fuel elements for high performance research reactors. The enrichment level (20% 235U) suggests that the U-Mo alloys should be between 6 to 10 wt. (%), which can reach up to 9 gU.cm-3 in fuel density. Nevertheless, the U-Mo alloys are very reactive with Al. Int
Mat. Res.. Publicado em: 02/10/2012
-
2. Aplicação de métodos não destrutivos para qualificação de combustíveis tipo dispersão de U308-Al e U3Si2-Al no reator IEA-R1 / Application of non-destructive methods for qualification of the U3O8-Al and U3Si2-Al dispersion fuels in the IEA-R1 Reactor
IPEN/CNEN-SP manufactures fuels to be used in its nuclear research reactor the IEA-R1. To qualify those fuels, it is necessary to check if they have a good performance under irradiation. As Brazil doesnt have nuclear research reactors with high neutron fluxes, or suitable hot cells for carrying out post-irradiation examination of nuclear fuels, IPEN/CNEN-SP
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 24/11/2011
-
3. Procedimento de fabricação de elementos combustível a base de dispersão com alta concentração de urânio / Fabrication procedures for manufacturing high uranium concentration dispersion fuel elements
IPEN-CNEN/SP developed the technology to produce the dispersion type fuel elements for research reactors and made it available for routine production. Today, the fuel produced in IPEN-CNEN/SP is limited to the uranium concentration of 3.0 gU/cm3 for U3Si2-Al dispersion-based and 2.3 gU/cm3 for U3O8-Al dispersion. The increase of uranium concentration in fuel
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 11/11/2011
-
4. Serrapilheira aplicada como biomonitor na avaliação do bosque urbano do Instituto de Pesquisas Energéticas e Nucleares, São Paulo,SP / Litterfall as biomonitors applied the evaluation of urban forest of the Nuclear and Energy Research Institute, São Paulo, SP
Several processes are considered responsible for ecosystems maintaining. Among them we can highlight mineral cycling that corresponds to the cycle of chemical elements that flow between the biotic compartments, leaves and litterfall, and abiotic, atmosphere and soil. These chemical elements accumulate of the active form through the absorption in the tissues
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 10/11/2011
-
5. Estudos de simulação computacional do processo de redução de UF4 a Urânio metálico / computational simulation studies of the reduction process of UF4 to metallic uranium
The production of metallic uranium is essential for production of fuel elements for using in nuclear reactors manufacturing of radioisotopes and radiopharmaceuticals. In IPEN, metallic uranium is produced by magnesiothermical reduction of UF4. This reaction is performed in a closed graphite crucible inserted in a sealed metal reactor and no contact with the
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 14/12/2010
-
6. ESTUDO DA TRANSFORMAÇÃO DE FASES DAS LIGAS U-2,5Zr-7,5Nb E U-3Zr-9Nb TRATADAS TERMICAMENTE A 600 C E DA COMINUIÇÃO PELO PROCESSO DE HIDRETAÇÃO-DESIDRETAÇÃO / PHASE TRANSFORMATION STUDY OF THE U-2.5Zr-7.5Nb AND U-3Zr-9Nb ALLOYS ISOTHERMALLY TREATED AT 600 C AND OF THE COMMINUTION BY THE HYDRIDING-DEHYDRIGING PROCESS
O combustível nuclear metálico tipo placa em dispersão é um combustível versátil que pode ser projetado para ser utilizado tanto em reatores de testes quanto em reatores de potência. A elevada densidade das ligas metálicas de urânio com elementos de transição, como, Zr, Nb, Mo, etc, propicia o emprego deste combustível utilizando urânio com baix
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 23/06/2010
-
7. Cálculos neutrônicos, termo-hidráulicos e de segurança de um dispositivo para irradiação de miniplacas (DIM) de elementos conbustíveis tipo dispersão / Neutronic, thermal-hydraulics and accident analysis calculations of an miniplate irradiation device (MID) of dispersion fuel elements
Neste trabalho foram desenvolvidos calculos neutrônicos, termo-hidráulicos e de segurança para avaliar a seguranca operacional de um dispositivo de irradiação a ser colocado no núcleo do reator IEA-R1 do IPEN-CNEN/SP. Este dispositivo de irradiação é utilizado para alojar miniplacas de combustvel do tipo dispers~ao de U3O8-Al e U3Si2-Al, com 19,75%
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/04/2010
-
8. Desenvolvimento dos Processos de Cominuição, Passivação e Investigação da Cinética de Hidretação Massiva da Liga U-4Zr-2Nb Pelo Processo de Hidretação-Desidretação
Neste trabalho foram realizadas a cominuição e passivação da liga metálica U-4Zr-2Nb pelo processo de hidretação-desidretação, bem como o estudo da sua cinética. A obtenção deste material pulverizado através das técnicas da metalurgia do pó é uma etapa necessária e chave na fabricação da pastilha, que será empregada na laminação da plac
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 22/02/2008
-
9. Investigação experimental da distribuição de temperaturas no reator nuclear de pesquisa TRIGA IPR-R1
The TRIGA-IPR-R1 Research Nuclear Reactor has completed 44 years in operation in November 2004. Its initial nominal thermal power was 30 kW. In 1979 its power was increased to 100 kW by adding new fuel elements to the reactor. Recently some more fuel elements were added to the core increasing the power to 250 kW. The TRIGA-IPR-R1 is a pool type reactor with
Publicado em: 2005
-
10. Experimental analysis of pressure drop and flow redistribution in axial flows in rod bundles
Fuel elements of PWR type nuclear reactors consist of rod bundles, arranged in a square array, and held by spacer grids. The coolant flows, mainly, axially along the rods. Although such elements are laterally open, experiments are performed in closed type test sections, originating the appearance of subchannels with different geometries. In the present work,
Journal of the Brazilian Society of Mechanical Sciences. Publicado em: 2000
-
11. THERMAL ANALYSIS OF AXIAL FLOWS IN A TYPICAL SUBCHANNEL OF NUCLEAR FUEL ELEMENTS / ANÁLISE TÉRMICA DE ESCOAMENTOS AXIAIS EM SUBCANAL TÍPICO DE ELEMENTOS COMBUSTÍVEIS NUCLEARES
Os elementos combustíveis de reatores nuclear são geralmente constituídos por feixes de barras contendo as pastilhas de combustível montadas em arranjos de geometria triangular ou quadrada, através dos quais o fluido refrigerante escoa axialmente. O projeto térmico desses elementos só pode ser efetuado se informações sobre o processo de retirada de
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 05/10/1979
-
12. Minerals Associated with Biofilms Occurring on Exposed Rock in a Granitic Underground Research Laboratory
The concept of disposal of nuclear fuel waste in crystalline rock requires the effects of microbial action to be investigated. The Underground Research Laboratory excavated in a pluton of the Canadian Shield provides a unique opportunity to study these effects. Three biofilms kept moist by seepage through fractures in granitic rock faces of the Underground R