Oil Water Flow
Mostrando 1-12 de 116 artigos, teses e dissertações.
-
1. Steel desulfurization on RH degasser: physical and mathematical modeling
Abstract Due to the high-quality steel demand, especially for ultra-low Sulfur steel, RH desulfurization has been practiced. Based on this, mathematical and physical modeling have been applied to study steel desulfurization by reagent addition in the RH degasser vacuum chamber. The main result of cold modeling, using water and oil emulating steel and slag, r
REM - International Engineering Journal. Publicado em: 2022
-
2. SEQUENTIAL MULTI-ELEMENT DETERMINATION OF TRACE-METALS IN BIODIESEL SAMPLES USING HR-CS FAAS
In this work the feasibility of sequential multi-element determination of Zn, Fe, Mg, Cu, Na, K, Cr, Al and Ca in biodiesel samples by high-resolution continuum source flame atomic absorption spectrometry (HR-CS FAAS) was investigated. Biodiesel samples obtained from different sources and different chemical processes were analysed. The samples were diluted w
Quím. Nova. Publicado em: 2021-02
-
3. Application of a New Validated HPLC-PDA Method for Simultaneous Determination of Curcumin and Melatonin in Hyaluronic Acid-Coated Nanoemulsions
In this study, a high-performance liquid chromatography with photodiode array detector (HPLC-PDA) method was developed and validated to simultaneously determine curcumin (CUR) and melatonin (MEL) in hyaluronic acid-coated nanoemulsions, a novel targetable delivery system to CD44 receptors overexpressed in many types of tumors. Chromatographic analyses were p
J. Braz. Chem. Soc.. Publicado em: 2020-03
-
4. EFFECT OF CYCLOPENTANE HYDRATES ON THE STABILITY OF DODAC AND AOT STRUCTURES
Abstract Hydrates are crystalline structures formed by water and substances with low molar mass molecules. Hydrate formation can occur during oil production when oil, gas and water flow through the same lines in conditions of high pressure and low temperatures. The deposition of hydrate crystals in production lines can severely jeopardize the safety of oper
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
5. Avaliação de parâmetros operacionais de um sistema de membranas para tratamento de efluentes oleosos
RESUMO O objetivo deste trabalho foi discutir os principais parâmetros de controle de um sistema de membranas de microfiltração para remoção de óleo de efluentes com base em ensaios experimentais. Os ensaios utilizaram efluentes sintéticos com diâmetros de gotas de óleo entre 4 e 8 µm. As membranas usadas foram do tipo fibra oca com módulo submers
Eng. Sanit. Ambient.. Publicado em: 26/08/2019
-
6. Design and analysis of different models of microfluidic devices evaluated in Enhanced Oil Recovery (EOR) assays
ABSTRACT Microfluidic devices are a new platform for Enhanced Oil Recovery (EOR) assays. The application of Colloidad Dispersion Gels (CDG) injection method has been proposed in recent years. However, the mechanism of oil recovery enhancement has not been completely elucidated. Its purpose is to mobilize oil by decreasing the permeability of channeled zones.
Matéria (Rio J.). Publicado em: 19/07/2018
-
7. Influence of water in the MQL technique in the grinding of steel AISI 4340 using CBN wheels
Abstract Usually, machining employs cooling methods to avoid high temperatures. In most cases, the cutting fluid is applied with high flow and low pressures. This technique consumes a large amount of cutting fluid that causes serious problems in the environment and in the health of the worker. An alternative to the conventional cooling method is the Minimum
REM, Int. Eng. J.. Publicado em: 2018-07
-
8. QUALITY OF MECHANICAL SOYBEAN HARVESTING AT TWO TRAVEL SPEEDS
ABSTRACT: Soybean harvesting is the last operation performed in the field and therefore has high added value. Quantitative losses during this process should therefore be minimized to achieve maximum quality and increase the sustainability of the production system. The aim of the present study was to determine and characterize the quantitative losses and oper
Eng. Agríc.. Publicado em: 2017-12
-
9. Analysis of Composite Membranes in the Separation of Emulsions Sunflower oil/water
Oil is a major pollutant of water resources, affects aquatic life, causing environmental degradation. Currently there is an increase in studies of membrane applied to separation of oil-water. Among these membranes, there are composite membranes, which show as main characteristic an association of organic and inorganic membrane properties. In a tangential flo
Mat. Res.. Publicado em: 18/05/2017
-
10. Physicochemical and functional characteristics of residual pulp of potato
Abstract Starch-rich liquid effluent is generated after peeling, cutting and washing of tubers during the fries processing. After sedimentation of this effluent is recovered a wet residual pulp, and after drying is obtained dry residual pulp or simply named in this study residual pulp of potato (RPP). In order to convert the effluent into a material easy to
Food Sci. Technol. Publicado em: 12/12/2016
-
11. CHARACTERIZATION AND EVALUATION OF WAXY CRUDE OIL FLOW
Abstract Part of the oil found in the Brazilian subsoil has a high wax content, which makes its flow process difficult at low temperatures because of the increase in the viscosity of the fluid. This paper studied the flow behavior of waxy crude oil under variation in the temperature of the external environment of the flow, the volumetric flow rate of the oil
Braz. J. Chem. Eng.. Publicado em: 2016-12
-
12. Effects of direct and alternating current on the treatment of oily water in an electroflocculation process
In the direct current mode (DC), widely used in electroflocculation (EC), the formation of an impermeable oxide layer on the cathode causes the declining of the efficiency of this process. This disadvantage has been reduced by adopting alternating current (AC). In this study, the effects of AC and DC on operational parameters such as the removal of oils and
Braz. J. Chem. Eng.. Publicado em: 2014-09