Petrochemical
Mostrando 1-12 de 206 artigos, teses e dissertações.
-
1. A Green Procedure Using Disposable Pipette Extraction to Determine Polycyclic Aromatic Sulfur Heterocycles in Water Samples and Solid Petrochemical Residues
A simple and efficient method using reduced amounts of solvents for the determination of polycyclic aromatic sulfur heterocycles (PASHs) in aqueous matrices from a lagoon and leachate solid waste from a petrochemical industry is proposed. The target analytes were previously concentrated using the disposable pipette extraction (DPX) technique applying gas chr
J. Braz. Chem. Soc.. Publicado em: 2021-02
-
2. ENERGY AND EXERGETIC EVALUATION OF THE MULTICOMPONENT SEPARATION OF PETROCHEMICAL NAPHTHA IN FALLING FILM DISTILLATION COLUMNS
Abstract Multicomponent separation of synthetic petrochemical naphtha (hexane, cyclohexane, toluene and xylene) was carried out in a falling film distillation sequence with heat supply using a vapor chamber (thermosyphon). Tests were carried out by varying feed flow rate and temperatures of the feed and the vapor chamber in two ways of heat supply: isotherma
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
3. Characterization and Comparative Analysis of Corrosion Resistance of 4 High Manganese Steels Models in Aqueous Solution of NaCl
The liquefied natural gas volumes that currently need to be stored and/or transported require engineering to consistently develop materials that combine high mechanical strength and low manufacturing costs. The present work brings the study of four models of high manganese steels (non-commercials), to demonstrate the feasibility of being used in the petroche
Mat. Res.. Publicado em: 09/12/2019
-
4. HEALTH RISKS PERCEPTION IN THE CONTEXT OF THE CONSTRUCTION OF A PETROCHEMICAL COMPLEX IN BRAZIL
Resumo Este artigo discute a percepção de riscos à saúde no entorno das áreas de construção de um Complexo Petroquímico. O objetivo do estudo foi determinar os fatores que levam à percepção de riscos à saúde do processo de construção do Complexo Petroquímico do Rio de Janeiro. Estudo transversal realizado com 240 indivíduos na região sudest
Ambient. soc.. Publicado em: 02/12/2019
-
5. Analysis of Residual Stress by the Hole-Drilling Method and Hardness in Dissimilar Joints of Austenitic Stainless Steel AISI 316L and Inconel 718 Alloy by Autogenous GTAW Process
Stainless steel and nickel alloy have high corrosion resistance in high-temperature environments due to the high Cr content present in their chemical composition, being widely used in components of nuclear reactors, petrochemical industries, etc. Through proper processes and procedures, it becomes possible to join these alloys. However, this union can genera
Mat. Res.. Publicado em: 02/12/2019
-
6. Tempo de Voo da Onda Difratada (ToFD) Auxilia na Garantia da Qualidade da Produção de Peças e Estruturas Mecânicas
Resumo A Técnica Tempo de Voo da Onda Difratada (ToFD) é uma técnica de ensaio não destrutivo por ultrassom utilizada para a detecção de falhas e descontinuidades em diferentes componentes, garantindo a qualidade, confiabilidade e segurança. É amplamente utilizada na indústria, principalmente na avaliação de peças e estruturas mecânicas. É lar
Soldag. insp.. Publicado em: 14/11/2019
-
7. Corrosion Resistance of Cu-Alloyed Precipitation Hardenable Duplex Stainless Steel ASTM A890 Grade 1B
Duplex stainless steels (DSS) are corrosion resistant alloys largely used in chemical and petrochemical industries. Some commercial DSS contain 0.5-1.0% copper addition to improve the corrosion resistance by reducing the corrosion rate in non-oxidizing environments. Higher copper addition (≥ 2%) can also hard by precipitation, especially when fine copper p
Mat. Res.. Publicado em: 07/11/2019
-
8. Influence of Molybdenum on Microstructure and Pitting Corrosion Behavior of Solution-Treated Duplex Stainless Steel in a Lithium Chloride Solution
With technological advances in the several areas of knowledge, the constant search for materials with characteristics that meet certain applications has been growing, especially in the chemical and petrochemical industries, where materials capable of withstanding the conditions of corrosion in aggressive environments are required. The aim of this paper was t
Mat. Res.. Publicado em: 24/10/2019
-
9. Corrosion Behavior of 316L and Alloy 182 Dissimilar Weld Joint with Post-Weld Heat Treatment
ABSTRACT Austenitic stainless steel and nickel-base alloys welds are widely used in nuclear reactor components, plants of energy generation, chemical, and petrochemical industries, due to their high corrosion resistance. The post weld heat treatments (PWHT) are generally applied to welding in order to relieve the welding residual stress. The aim of this work
Matéria (Rio J.). Publicado em: 16/09/2019
-
10. Produção e caracterização de revestimentos de ligas metálicas Cu-Sn em banho eletrolítico contendo glicina: ensaios preliminares
RESUMO Os problemas relacionados à corrosão são frequentes, podendo ocorrer nas mais variadas áreas, tais como, nas indústrias química, petroquímica, naval, de construção civil e automobilística, dentre outros setores produtivos. Portanto, métodos para prevenir a corrosão devem ser empregados para evitar a perda de materiais e o uso de revestimen
Matéria (Rio J.). Publicado em: 16/09/2019
-
11. Boom, Burst, and Doom: The Petrochemical Complex of Rio de Janeiro as Catalyzer of Urban-Regional Development
Resumo O desenvolvimento liderado por recursos naturais é amplamente debatido por conta das dificuldades de se converter a riqueza mineral em maior bem-estar social. Assim, a construção do Complexo Petroquímico do Rio de Janeiro - COMPERJ no estado do Rio de Janeiro, o maior produtor brasileiro de petróleo e gás, foi empreendida como uma estratégia de
Rev. Bras. Estud. Urbanos Reg.. Publicado em: 22/08/2019
-
12. Environmental exposure to benzene: evaluation of urinary S-PMA and polymorphism (CYP2E1-1293G>C and NQO1 609C>T) in Campos Elíseos residents, Duque de Caxias, Rio de Janeiro State, Brazil
O benzeno é uma das substâncias mais importantes para a biomonitorização, em função do uso disseminado, da contaminação ambiental que resulta da emissão e dos efeitos sobre a saúde humana. O benzeno é classificado pela Agência Internacional de Pesquisa em Câncer (IARC) como carcinógeno conhecido em seres humanos (grupo 1) e está associado ao d
Cad. Saúde Pública. Publicado em: 12/08/2019