Plastic Deformation
Mostrando 1-12 de 172 artigos, teses e dissertações.
-
1. Effect of Welding Parameters on Nanostructured Fe-(C, B)-(Cr, Nb) Alloys
New nanostructured Fe-(Nb,Cr)-(C,B) multicomponent alloys have been developed for hardfacing application. They have better wear resistance than traditional Fe-Cr-C alloys. The nano-alpha-Fe, eutectic and hard carboborides phases of the weld metal usually show variations with the welding procedure. 6 test samples with different heat input were welded. It was
Mat. Res.. Publicado em: 20/01/2020
-
2. The Effects of Friction Coefficient on Formability Behaviour of Dual Phase Steel
The effects of friction coefficient on formability behavior of advanced high-strength steel sheets have been examined in this study. For this purpose, forming analysis has been conducted by stretching the three different steel sheets such as DP600, DP800 and DP1000. Forming processes have been done by using punch that has different friction coefficients (0.0
Mat. Res.. Publicado em: 14/11/2019
-
3. Efeito do metal de adição na resistência ao desgaste por deslizamento de um aço estrutural soldado por GMAW
RESUMO O objetivo do presente trabalho foi avaliar o efeito do metal de adição na soldagem, e das microestruturas resultantes, na resistência ao desgaste de juntas soldadas de um aço estrutural ASTM A242, que possui resistência à corrosão atmosférica e é utilizado na fabricação de vagões destinados ao transporte de minério. As amostras foram sol
Matéria (Rio J.). Publicado em: 16/09/2019
-
4. Multi-scale representation of plastic deformation in fiber-reinforced materials: application to reinforced concrete
Abstract Here we present a multi-scale model to carry out the computation of brittle composite materials reinforced with fibers, and we show its application to standard reinforced concrete. The computation is carried out within an operator-split framework on the macro-scale, which allows for different failure mechanisms to develop in separate phases, as both
Lat. Am. j. solids struct.. Publicado em: 12/08/2019
-
5. The Features of Localized Plasticity Autowaves in Solids
The localized plastic deformation and the law-like regularities underlying its development in solids are considered. The characteristic features of localized plasticity are analyzed for a wide range of materials. Thus a correlation is established between the products of scales and of process rates obtained for the elastic and plastic deformation. It is a fav
Mat. Res.. Publicado em: 08/08/2019
-
6. Bioassay Technique and Maintenance of Gyropsylla spegazziniana (Lizer, 1719) (Hemiptera: Psylloidea: Aphalaridae) in vitro Conditions
ABSTRACT Gyropsylla spegazziniana is one of the most important pest of yerba mate by sap-sucking that lead to leaves deformation and there are no insecticides registered for its control. The present study describes a new technique to be used in bioassays with the insect. Galls were collected from infested yerba mate plants. In the laboratory, the galls were
Floresta Ambient.. Publicado em: 01/08/2019
-
7. Influence of Mechanical Cycling on Residual Strain in Superelastic Cu-Al-Be-Nb Alloys
The understanding of the stabilization mechanism of martensite used to obtain alloys with high hysteresis and the possibility of recovering this martensite (residual strain) by heating at temperatures higher than As and Af have been fundamental for application in bonding devices. One of the possibilities to enhance residual strain is through mechanical cycli
Mat. Res.. Publicado em: 15/07/2019
-
8. Mechanical Properties Analysis of Al2024 alloy Submitted to Different Aging Time and different Cold Plastic Deformation degree
Brazilian aeronautical industries report that, due to the high mechanical properties presented commercially, AA2024-T351 alloy presents fissures and non-homogeneous deformations during the mechanical processing. This work proposes a manufacturing process capable of increasing the ductility of the material to withstand tensions during processing and a subsequ
Mat. Res.. Publicado em: 10/07/2019
-
9. Investigation of the Roof Presplitting and Rock Mass Filling Approach on Controlling Large Deformations and Coal Bumps in Deep High-Stress Roadways
Abstract Roadway deformation and coal bumps are major challenges for underground engineering. Taking the Lu'an mining district in Shanxi Province as an example, the failure mechanism of deep high-stress roadway was studied. Numerical simulations and the similar material test were performed to investigate the effect of the roof presplitting and rock mass fill
Lat. Am. j. solids struct.. Publicado em: 27/05/2019
-
10. Study on elastoplastic coupling mechanics model of the milled mixture of sugar cane
Abstract At present, the phenomenon of elastoplastic coupling isn’t considered in establishing the mechanics model of the milled mixture of sugar cane. In order to describe elastoplastic coupling and yield characteristics, based on uniaxial confined compression tests and direct shear tests, the evolution of the elastic parameters of the solid fiber with v
Food Sci. Technol. Publicado em: 11/04/2019
-
11. Continuous Scanning Technique with Barkhausen Magnetic Noise for Carbon Steel Sheets
This work studies the application of a Non-Destructive Inspection Technique (NDIT), based on the Magnetic Barkhausen Noise (MBN), for the detection of non-homogeneous regions in carbon steel plates. It presents the advances in the development of a variant of a new non-destructive magnetic test technique, called Continuous Scanning Magnetic Barkhausen Noise (
Mat. Res.. Publicado em: 10/01/2019
-
12. A study on the response of single and double circular plates subjected to localised blast loading
Abstract The response of single and double layered steel plates to localised air-blast loading was examined. Two configurations, both comprising fully clamped circular plates with a 200 mm exposed diameter, were considered: 4mm thick single and (2+2) mm double layered plates. The localised air-blast loading was applied by centrally detonating discs of PE4 pl
Lat. Am. j. solids struct.. Publicado em: 14/11/2018