Polymer Blend
Mostrando 1-12 de 67 artigos, teses e dissertações.
-
1. Polyacrylamides in reverse cationic iron ore flotation: bench scale study
Abstract A bench scale study was carried out to investigate the influence of polyacrylamides as co-depressant in a blend with starch depressant on the reverse cationic iron ore flotation. The results indicated that the use of polyacrylamides as dual function polymer should be an alternative to improve the flotation process. These polymers act as a depressant
REM, Int. Eng. J.. Publicado em: 2021-09
-
2. Influence of water absorption on glass fibre reinforced IPN composite pipes
Abstract Glass fibre reinforced composite pipes were fabricated by using an IPN blend of 0%, 10%, 20%, 30%, 40%, 50% PU prepolymer (Polyurethane) with VER(Vinylester) resin. The prepared IPN (Interpenetrating polymer networks) composite pipes were subjected to boiling water immersion tests in order to study the effect of moisture absorption characteristics.
Polímeros. Publicado em: 04/11/2019
-
3. Obtenção de scaffolds bioabsorvíveis a partir de blenda de PLGA e IR com adição de hidroxiapatita
RESUMO A obtenção de scaffolds bioativos a partir da blenda polimérica de poli (ácido láctico-co-glicólico) (PLGA) e poliisopreno (IR) com diferentes adições de Hidroxiapatita (HAp) é proposta como uma alternativa à engenharia de tecidos. Para o preparo das soluções poliméricas, a blenda de PLGA/IR e a HAp foram dissolvidas em clorofórmio. Post
Matéria (Rio J.). Publicado em: 16/09/2019
-
4. Toughening of bio-PE upon addition of PCL and PEgAA
Abstract Researches of polymer blends based on biological and biodegradable polymers appear as a viable alternative to develop environmentally friendly materials. Therefore, the aim of this research was to produce compounds made with biological polyethylene, i.e., Biopolyethylene, Bio-PE, added to the biodegradable Polycaprolactone (PCL) and functionalized b
REM, Int. Eng. J.. Publicado em: 19/06/2019
-
5. Non-isothermal melt crystallization kinetics of poly(3-hydroxybutyrate), poly(butylene adipate-co-terephthalate) and its mixture
Abstract Nonisothermal crystallization and melting of the biodegradable thermoplastics poly(3-hydroxybutyrate) (PHB), poly(butylene adipate-co-terephthalate) (PBAT), and a 1:1 PHB/PBAT blend were investigated by differential scanning calorimetry (DSC) over an extensive range of heating/cooling rates (2 to 64°C/min). The different phase transition behavior
Polímeros. Publicado em: 18/03/2019
-
6. Predicting LDPE/HDPE blend composition by CARS-PLS regression and confocal Raman spectroscopy
Abstract Industries and the scientific community currently focus on creating new ways to recycle and to reuse polymer waste that leads to serious socio-environmental risks. However, the quality of recycled polyethylenes depends strongly on their purity degree, but the distinction between Low Density Polyethylene (LDPE) and High Density Polyethylene (HDPE) b
Polímeros. Publicado em: 18/03/2019
-
7. Quantification of Aerospace Polymer Blends by Thermogravimetric Analysis and Infrared Spectrometry
ABSTRACT Ethylene-propylene-diene elastomer (EPDM) is employed as thermal insulation for rocket motors, as well as EPDM blends with ethylene vinyl acetate (EVA) have been used in the aerospace industry. The quantification of these blends is more common using Fourier Transform Infrared Spectrometry (FT-IR) by transmission mode, but without discussing sample p
J. Aerosp. Technol. Manag.. Publicado em: 07/01/2019
-
8. Structural, Optical and Thermal Characterizations of PVA/MAA:EA Polyblend Films
Films of polyvinyl alcohol (PVA), Methacrylic Acid - Ethyl Acrylate (MAA:EA) copolymer and their blends PVA:MAA:EA of composition 80:20, 60:40, 50:50, 40:60, 20:80 (wt %) were prepared by using the solution cast technique. The prepared films were investigated by structural, optical and thermal studies. X-ray diffraction (XRD) scans revealed the semicrystalli
Mat. Res.. Publicado em: 16/07/2018
-
9. FT-IR methodology (transmission and UATR) to quantify automotive systems
Abstract When using Fourier transform infrared spectroscopy (FT-IR) under the qualitative aspect for characterization of polymer blends, often a simple identification of each one of the existing polymers in the blend does not justify the material failure since different amounts of each component may result in different mechanical properties, which should be
Polímeros. Publicado em: 15/03/2018
-
10. A Microrheological Study of Poly(Methyl Methacrylate) Elastomer/Poly(Ethylene Terephthalate) (PMMAelast/PET) Blends
This study involved an evaluation of the influence of phase inversion in poly(methyl methacrylate) elastomer/poly(ethylene terephthalate) binary blends (PMMAelast/PET) and the effect of the addition of poly(methyl methacrylate-glycidyl methacrylate-ethyl acrylate) (MGE) interfacial compatibilizer on the microrheological properties of this polymer blend. Ther
Mat. Res.. Publicado em: 30/11/2017
-
11. Efficiencies of Dipolymer Rubber Blends (EPDM\FKM) using Common Weight Data Envelopment Analysis
Polymer blends are generally categorized into two main classes: miscible blends that exist in a single homogeneous phase exhibiting synergistic properties and immiscible blends that have 2 or more different phases. There is also a third category of blends called technologically compatible blend, which exist in two or more different phases on micro scale, yet
Mat. Res.. Publicado em: 09/10/2017
-
12. Influence of SEBS-MA and SBS compatibilizers on properties and morphology of blends of polystyrene/rubber residue (SBRr) from the footwear industry
Abstract The reuse of rubber waste is very important today, both to reduce the harmful effects on the environment, and to reduce the cost of new material development. Considering that most of the studies reported in literature refer to the reuse of tire waste, this article aims to evaluate the influence of styrene-butadiene-styrene (SBS) and styrene-(ethylen
REM, Int. Eng. J.. Publicado em: 2017-06