Polymer Film
Mostrando 1-12 de 148 artigos, teses e dissertações.
-
1. ERRATUM
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Arq. Neuro-Psiquiatr.. Publicado em: 2021-06
-
2. Polyamide 11 porous films by NIPS: the influence of miscibility and polymer crystalline formation in pores structure and morphology
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Quím. Nova. Publicado em: 2021-06
-
3. Heterotopic Heart Transplant History and Concepts Cannot Be Neglected - Witnessing the History and Learning with Previous Practices
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Braz. J. Cardiovasc. Surg.. Publicado em: 2021-06
-
4. Trypanocidal Activity and Increased Solubility of Benznidazole Incorporated in PEG 4000 and Its Derivatives
Selecting a polymer depends on its characteristics, the properties of the drug and of the remaining ingredients in the formulation. The drug, when incorporated into a polymeric matrix, can show several advantages when compared with its conventional form. In this context, this work describes the preparation and characterization of polyethylene glycol (PEG 400
J. Braz. Chem. Soc.. Publicado em: 2021-06
-
5. ANALYTICAL EXPRESSIONS FOR THE CONCENTRATION AND CURRENT IN THE REDUCTION OF HYDROGEN PEROXIDE AT A METAL-DISPERSED CONDUCTING POLYMER FILM
A mathematical model describing the reduction of Hydrogen peroxide (H2O2) to water in a metal dispersed conducting polymer film is discussed. The model is based on a system of reaction-diffusion equations containing a non-linear term related to Michaelis-Menten kinetics of the enzymatic reaction. The approximate analytical expressions corresponding to the co
Quím. Nova. Publicado em: 2020-01
-
6. Transmissive to Dark Electrochromic and Fluorescent Device Based on Poly(fluorene-bisthiophene) Derivative
Films of a poly(fluorene-bisthiophene) derivative, named PFBT, were electrodeposited onto indium tin oxide (ITO) electrodes and their electrochromic and fluorescence properties were investigated. Such films displayed color variation from yellow, in the neutral state, to green, in the oxidized state, as shown by tracking of the CIE (Commission Internationale
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
7. Efeito dos ácidos itacônico e fumárico na copolimerização em emulsão do estireno com acrilato de n-butila para produção de argamassa cimentícia
RESUMO Monômeros carboxílicos são frequentemente empregados em formulações de polímeros obtidos via polimerização em emulsão e miniemulsão visando melhorar ás propriedades de aplicação dos látexes. O objetivo deste trabalho foi avaliar o efeito dos ácidos itacônico IAI), fumárico (AF) e metacrílico (AMA) na copolimerização em emulsão do
Matéria (Rio J.). Publicado em: 16/09/2019
-
8. Influência da concentração dos monômeros de acrilato e metacrilato de hidroxipropila na copolimerização em emulsão do estireno com acrilato de n-butila e acrilonitrila para produção de adesivos.
RESUMO Monômeros acrílicos contendo grupos hidroxila são frequentemente empregados na produção de polímeros, especialmente para aplicações em diferentes substratos ou mesmo em reações posteriores de modificação química com grupos isocianato ou carboxila. Este trabalho tem como objetivo estudar o efeito da concentração dos monômeros de acrilat
Matéria (Rio J.). Publicado em: 16/09/2019
-
9. Thermomechanical Properties of Corn Starch Based Film Reinforced with Coffee Ground Waste as Renewable Resource
Abstract Starches polymeric films offer several advantages for the replacement of synthetic polymers due to their biodegradability, non-toxicity, availability and low cost. However, the high biodegradation potential can cause fragility, considering some fundamental mechanical properties. Therefore, starch based polymeric films were reinforced incorporating l
Mat. Res.. Publicado em: 07/01/2019
-
10. Development and characterization of gas sensors using thin films of polyaniline as active layer
ABSTRACT This work aimed at the development and characterization of gas sensing devices using thin films of polyaniline (PAni) as active layer, deposited by in situ polymerization. The polyaniline, an intrinsically conductive polymer, was used due to its high sensitivity to gases, low response time and stability, ease of synthesis and low cost. The sensor wa
Matéria (Rio J.). Publicado em: 06/12/2018
-
11. Starch Films Added of Açaí Pulp ( Euterpe oleracea Martius)
ABSTRACT Edible films are an alternative to synthetic materials used for packaging foods. The aim of this study was to develop and characterize films made from cassava starch, freeze-dried acai and glycerol. The films were characterized for thickness, water vapor permeability, water solubility, anthocyanins, antioxidant capacity and mechanical properties. Th
Braz. arch. biol. technol.. Publicado em: 29/11/2018
-
12. Membranas Compuestas: propiedades superficiales y estabilidad térmica
ABSTRACT The composite membranes were manufactured with crosslinking poly(vinyl alcohol) on polyethersulfone porous membranes by coating process. PES membranes were exposed to air plasma for the purpose of surface modification. The coating of the support membrane was carried out by using a polymer matrix with a crosslinking agent. The physico-chemical proper
Matéria (Rio J.). Publicado em: 19/07/2018