Powder Diffraction
Mostrando 1-12 de 319 artigos, teses e dissertações.
-
1. Tailoring the properties of Y2O3 via synthesis parameters varied during the PVA-assisted sol-gel route
Abstract The effect of synthesis parameters on the microstructural behavior and morphology during the yttrium oxide (Y2O3) formation is reported. Y2O3 crystals were produced by a modified sol-gel route assisted by polyvinyl alcohol solution varying the calcination temperature and solution pH. The crystalline phase formation was investigated using X-ray powde
Cerâmica. Publicado em: 2023
-
2. Obtainment of a new metal matrix composite from the recycling of UNS S31803 duplex stainless steel by powder metallurgy
Abstract The purpose of circular economy is to maximize resources efficiency. With the increase in consumption of raw materials, energy and waste generation, recycling is necessary for environmental and industrial reasons. Thus, the powder metallurgy, together with mechanical milling, stands as a new method for scraps recycling. This study aimed to produce U
REM - International Engineering Journal. Publicado em: 2022
-
3. Microstructure and diametral fracture strength of spark plasma sintered WC-6Co-0.2B and WC-6Co-0.5B ceramic composites from nanosized and metastable WC powders
Abstract The present work aimed at evaluating the microstructures and mechanical properties of spark plasma sintered WC-6 wt% Co ceramic composites doped with boron (0.2 and 0.5 wt%). W-50 at% C (W-6.13 wt% C) powders produced under different milling times (20, 60, 180, and 600 min) were used as starting materials and subsequently mixed with Co (6 wt%) and B
Cerâmica. Publicado em: 2022
-
4. Study of nanocomposites with carbon nanotubes and their tendency for carbon organization
Abstract The carbon derived from the thermal treatment of modified phenolic resins (PR) tends to organize into graphitic lamellae or turbostratic carbon and is commonly considered non-graphitizable. In this study, nanocomposites were synthesized with modified phenolic resin (Novolac) used as the matrix and oxidized multi-walled carbon nanotubes (NTox) in amo
Cerâmica. Publicado em: 2022
-
5. Structural Characteristics of Lignite Char from Different Pyrolysis Reactors and the Influence on Their Gasification Reactivity
The gasification reactivity of coal char is affected by numerous experimental variables, and char structure is one of the dominant factors. In this work, Raman spectroscopy, powder X-ray diffraction (XRD), and N2 adsorption were used to investigate the physical and chemical structure of char prepared under different pyrolysis conditions. Three kinds of pyrol
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
6. The influence of separately and combined bentonite and kaolinite as binders for pelletization of NaA zeolite from coal fly ash
Abstract Pelletization of zeolitic materials is required to facilitate their practical industrial and commercial applications. Zeolite-NaA was synthesized from fly ash by the fusion method and shaped into spherical granules. Bentonite, kaolinite, and a combination of bentonite with kaolinite were tested as binders with different contents from 5 to 10 wt%. Th
Cerâmica. Publicado em: 2022
-
7. Enhancement of Visible Light-Responsive Photocatalytic Efficiency by Using a Laccaic Acid-Modified Titanium Dioxide Photocatalyst
In this study, a laccaic acid-modified TiO2 photocatalyst (Lac-TiO2) was prepared via an impregnation method with 0.50, 1.00, 2.50, and 5.00 wt.% laccaic acid. The products’ physical properties were examined through X-ray powder diffraction (XRD), field emission scanning electron microscopy (FE-SEM), X-ray photoemission spectroscopy (XPS), UV-Vis diffused
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
8. Iron Cobaltite (FeCo2O4) Nanocatalysts for Water-Oxidation: Effects of Annealing Temperature on Catalytic Properties
The development of efficient, stable, and non-precious metal water oxidation catalysts (WOCs) is a matter of importance for sustainable energy research. In this work, iron cobaltite (FeCo2O4) nanoparticles were prepared by the coprecipitation method, and we present the effect of heat treatment (250, 350, 450, 650 and 900 °C) on the catalytic properties. Cat
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
9. Expansibility of vermiculite (Santa Luzia, Brazil) irradiated with microwave
Abstract The effect of microwave heating on the expansion of vermiculite was studied at a level of 700 W for 4 min exposure time and compared with raw vermiculite. In this study, the characterization of vermiculite from a mine in the northeast region of Brazil was performed using thermogravimetry, N2-adsorption, cation exchange capacity, X-ray powder diffrac
Cerâmica. Publicado em: 2021-06
-
10. Compatibility by a Nonisothermal Kinetic Study of Azathioprine Associated with Usual Excipients in the Product Quality Review Process
Azathioprine is an immunosuppressive drug for several inflammatory disorders. Due to its clinical relevance, to explore the solid-state properties for excipient compatibility in the product quality review process is essential. Fourier transform infrared spectroscopy, powder X-ray diffraction and thermal analysis (thermogravimetry/derivative thermogravimetry
J. Braz. Chem. Soc.. Publicado em: 2021-03
-
11. Dielectric and Magnetic Properties of Epoxy with Dispersed Iron Phosphate Glass Particles by Microwave Measurement
Abstract This paper investigates the dielectric properties and magnetic properties of epoxy composites with different amount of powdered iron phosphate glass (IPG) at 8.2 GHz to 12.4 GHz using microwave technique. IPG composed of 60P2O5-40Fe2O3 (mol%) was produced by conventional melt and quenching method and crushed into powder. The IPG powder was character
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-06
-
12. Kinetics of Lumefantrine Thermal Decomposition Employing Isoconversional Models and Artificial Neural Network
Thermal analysis can be used to determine shelf-life and kinetic parameters in pharmaceutical systems. This work investigates the kinetic of lumefantrine thermal decomposition, an antimalarial, using non-isothermal and isothermal experimental data. The non-isothermal conditions are analyzed applying Vyazovkin method, while isothermal conditions employ models
J. Braz. Chem. Soc.. Publicado em: 2020-03