Rans Turbulence Model
Mostrando 1-8 de 8 artigos, teses e dissertações.
-
1. Application of an alternative mesh morphing method on the numerical modeling of oscillating wave surge converters
RESUMO Uma das tecnologias capazes de explorar a energia das ondas, baseada na captação das componentes horizontais do movimento destas, aliada a um sistema placa-pistão, vem experimentando um notável desenvolvimento ao longo dos últimos anos, tal dispositivo é conhecido como conversor oscilante por translação de ondas. Este possui um grande potencia
RBRH. Publicado em: 29/07/2019
-
2. ON THE PERFORMANCE OF DIFFERENT RANS BASED MODELS TO DESCRIBE THE TURBULENT FLOW IN AN AGITATED VESSEL USING NON-STRUCTURED GRIDS AND PIV VALIDATION
ABSTRACT The performances of the Standard κ-ε, RNG, Realizable, κ-ω and RSM turbulence models to describe the behavior of the flow in agitated tank reactors were evaluated. Because most of these tanks have complex geometries, structured meshing schemes are not a practical alternative in engineering. Two particular unstructured meshing schemes composed of
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
3. Numerical Study of Wake Characteristics in a Horizontal-Axis Hydrokinetic Turbine
ABSTRACT Over the years most studies on wake characteristics have been devoted to wind turbines, while few works are related to hydrokinetic turbines. Among studies applied to rivers, depth and width are important parameters for a suitable design. In this work, a numerical study of the wake in a horizontal-axis hydrokinetic turbine is performed, where the ma
An. Acad. Bras. Ciênc.. Publicado em: 01/12/2016
-
4. NUMERICAL SIMULATION OF THE INCOMPRESSIBLE TURBULENT FLOW OF A BINARY MIXTURE OF AIR-WATER VAPOR: APPLICATIONS IN DRYING PROCESS
Abstract The present work deals with numerical simulation of the incompressible turbulent flow of a binary mixture air-water vapor inside channels. Calculations are performed using the RANS (Reynolds Average Navier-Stokes Equations) formulation in addition to the standart k-ε turbulence model. The mathematical model is discretized by a finite difference sch
Braz. J. Chem. Eng.. Publicado em: 2016-06
-
5. Numerical Simulation of Performance of an Axial Turbine First Stage
Abstract: This work has presented the first stage performance at design and off-design operating points of an axial turbine, with two stages using a numerical simulation. Experimental methods of predicting the performance of axial turbine is costly and time consuming compared to the computationalfluid dynamics approach. Therefore, computational techniques we
J. Aerosp. Technol. Manag.. Publicado em: 2012-06
-
6. Levantamento de Curvas de EficiÃncia de Aerogeradores de 3m de DiÃmetro Utilizando Modelos de TurbulÃncia Rans de Uma e Duas EquaÃÃes com ComparaÃÃo Experimental / SURVEY OF EFFICIENCY CURVES OF A 3M DIAMETER WIND TURBINE USING ONE AND TWO EQUATIONS RANS TURBULENCE MODELS WITH EXPERIMENTAL COMPARISON
Realizou-se o levantamento de curvas de eficiÃncia utilizando odelos numÃricos RANS de uma e duas equaÃÃes para um erogerador com 3m de diÃmetro, utilizando pÃs projetadas para operar em diferentes condiÃÃes de λ com perfis NACA 0012, 4412 e 6412. A parametrizaÃÃo da geometria da malha para a dimensÃo do rotor, juntamente com a parametrizaÃ�
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/02/2011
-
7. NUMERICAL INVESTIGATION OF THE TURBULENT FLOW SEPARATION BUBBLE OVER INCLINED THIN FLAT PLATE / ANÁLISE NUMÉRICA DA BOLHA DE SEPARAÇÃO DO ESCOAMENTO TURBULENTO SOBRE PLACA PLANA FINA INCLINADA
A estabilização de mísseis e projéteis é normalmente realizada através de aletas, que podem ser representadas por placas planas finas. O escoamento sobre placas finas é de difícil previsão por apresentar diversos fenômenos, tais como transição da camada cisalhante para regime turbulento, recolamento, relaminarização e geração de bolhas primá
Publicado em: 2009
-
8. A K − W turbulence model for near-wall thermal flows / Um modelo k − w para escoamentos turbulentos parietais dilatáveis
The main goal of this work is to extend the K − W turbulence model proposed by Bredberg (2002), originally developed in order to simulate turbulent isothermal flows in which adverse pressure gradients occur, to simulate the effects of density variations exclusively due to the presence of thermal gradients - cases vastly applied in industry - implementi
Publicado em: 2006