Recovery Of Waste
Mostrando 1-12 de 114 artigos, teses e dissertações.
-
1. Evaluation of the Properties of LaNiO3 Material Prepared by the Modified Proteic Method for Adsorption of Environmental Contaminants
LaNiO3 material was synthesized by modified proteic method, calcined at 900 °C/2 h in air atmosphere and was applied to remove environmental contaminants. LaNiO3 phase with a perovskite structure was formed in the calcined material, which has a surface area of 22 m2 g-1 and is formed by fine particles agglomerated, with pH of the zero charge point of 7.44.
Journal of the Brazilian Chemical Society. Publicado em: 2023
-
2. Job precariousness: supply chain management in a waste pickers association
Resumo Waste pickers are key players within municipal solid waste management and an important link in the recycling chain. Waste pickers perform their activities in precarious conditions: they work in bad weather; run the risk of traffic accidents; come in contact with insects that transmit disease and suffer from weight overload. These conditions are aggrav
Interações (Campo Grande). Publicado em: 2022
-
3. Exergy and emergy: complementary tools for assessing the environmental sustainability use of biosolids generated in wastewater-treatment plant for energy-production
Taking advantage of the energy contained in the biosolids generated in a wastewater treatment plant (WWTP) is one of the processes of greatest interest due to the opportunity to obtain an energy resources from a waste. The aim of this research was to analyze the environmental sustainability use of biosolids generated in a wastewater-treatment plant for energ
Química Nova. Publicado em: 2022
-
4. Additive Manufacturing towards the Fabrication of Greener Electrochemical Sensors for Antioxidants
Additive manufacturing is an emerging tool that has contributed to the sustainable fabrication of devices in several areas based on the concept of “zero waste”. Considering extrusion-based manufacturing (or 3D printing), polylactic acid (PLA) has been highlighted due to its biodegradability, obtention from renewable sources, and compatibility for 3D prin
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
5. Mapping of areas suitable for the application of biosolids in the Quadrilátero Ferrífero region, Minas Gerais, Brazil
Abstract The recovery of degraded areas is imperative for the sustainability of mining activities. The main action implemented to improve the chemical, physical and biological conditions of soils, tailings and sterile deposits is the incorporation of organic material. Biosolids (hygienized sewage sludge) are among the organic materials that can be applied. H
REM - International Engineering Journal. Publicado em: 2022
-
6. PROCESSING OF A METAL CONCENTRATE FROM GROUND WASTE PRINTED CIRCUIT BOARDS IN ACIDIC MEDIA USING HYDROGEN PEROXIDE AS OXIDANT
The recovery of precious and base metals of a metal concentrate from ground waste printed circuit boards (PCBs) is described in detail. Samples were treated with NaOHaq. to remove the soldering mask. Experiments were performed in acidic medium (HF, H2SO4, CH3COOH or H3PO4) using H2O2 as oxidant. Base metals were leached in high yields (>99 wt.%) at ~40 ºC a
Quím. Nova. Publicado em: 20/07/2020
-
7. ADDITION OF BOILER CHARCOAL WASTE TO COMPOST FOR USE AS SUBSTRATE FOR VEGETABLE SEEDLINGS
ABSTRACT The recovery of waste from the broiler production chain (BPC) is consistent with the principles of a circular economy. Besides turning waste into organic compost, its use as substrate for the production of vegetable seedlings further increases its economic value. However, it is necessary to adapt its characteristics to enable its use as substrate. T
Eng. Agríc.. Publicado em: 09/12/2019
-
8. Análise do potencial de aproveitamento energético de biogás de aterro e simulação de emissões de gases do efeito estufa em diferentes cenários de gestão de resíduos sólidos urbanos em Varginha (MG)
RESUMO O presente trabalho propõe avaliar a viabilidade econômica e ambiental de aproveitamento energético do biogás do aterro sanitário do município de Varginha (MG), além de analisar as emissões de gases de efeito estufa (GEE) e o uso de energia em diferentes cenários hipotéticos de gerenciamento de resíduos sólidos urbanos (RSU). Considerou-se
Eng. Sanit. Ambient.. Publicado em: 25/11/2019
-
9. Recovery of chitin and chitosan from shrimp waste with microwave technique and versatile application
RESUMO: Neste estudo, a quitina e a quitosana foram extraídas de resíduos de Litopenaeus vannamei utilizando métodos químicos e do micro-ondas. Os resíduos de camarão foram limpos, secos e peneirados a 16, 32 e 60 mesh, e as amostras foram despigmentadas, desmineralizadas e desproteinizadas. Posteriormente, a quitina foi submetida a processo de desacet
Arq. Inst. Biol.. Publicado em: 28/10/2019
-
10. Halogen Determination in Polymeric Waste of Electrical and Electronic Equipment: Overcoming Limitations in Sample Preparation
Sample preparation of polymers for halogen determination requires special attention because they are difficult to bring into solution and due to the risk of analyte losses when using acid digestion. A method using microwave-induced combustion (MIC) was optimized for accurate determination of halogens in polymeric parts obtained in waste of electrical and ele
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
11. Enrichment of Copper, Lead, and Tin by Mechanical Dry Processing of Obsolete Printed Circuit Board Residues
Waste printed circuit boards (WPCB) residues were mechanically processed to concentrate their metal content aiming to reduce costs of the subsequent recovery of copper, tin, and lead. A fully dry route was proposed to avoid the generation of liquid effluents that would require additional treatment. Firstly, 10.7% of the residue was segregated by magnetic sep
Mat. Res.. Publicado em: 24/10/2019
-
12. REVISITING THE NUCLEOPHILICITY CONCEPT IN A COMPREHENSIVE BIOMASS VALORIZATION EXPERIMENT: FROM PAPAYA SEEDS TO THIOUREA MOTIFS
The recovery of waste materials with potential for synthetic transformations is a major field in science. However, just few experiments have been devoted to undergraduate students by exploring some consistent subjects in light of simple, natural resources. Nucleophilicity is a central subject in chemistry and there are significant synthetic models to exploit
Quím. Nova. Publicado em: 21/10/2019