Rotary Drying
Mostrando 1-12 de 20 artigos, teses e dissertações.
-
1. Drying protocol influence on the bond strength and apical sealing of three different endodontic sealers
Abstract The aim of this study was to evaluate the influence of drying protocols (DP) on the apical sealing (AS) and on the bond strength (BS) of teeth filled with different sealers. The root canals of one hundred and fifty-six roots of maxillary canines were prepared with Reciproc rotary files (R50). The teeth were randomly divided into four groups (n = 39)
Braz. oral res.. Publicado em: 20/05/2016
-
2. Modelling of fertilizer drying in a rotary dryer: parametric sensitivity analysis
This study analyzed the influence of the following parameters: overall volumetric heat transfer coefficient, coefficient of heat loss, drying rate, specific heat of the solid and specific heat of dry air on the prediction of a model for the fertilizer drying in rotary dryers. The method of parametric sensitivity using an experimental design was employed in t
Brazilian Journal of Chemical Engineering. Publicado em: 2012-06
-
3. Estudos fluidodinâmicos e de secagem de fertilizantes em secadores rotatórios concorrentes
A secagem consiste em uma importante operação na qual se submetem diversos produtos industrializados. Porém, este processo é concebido como uma operação unitária que demanda uma intensa quantidade de energia o que implica em um grande impacto comercial no custo do produto final. O secador rotatório convencional de contato direto consiste em um equipa
Publicado em: 2010
-
4. Cultivares, variaves de processo, reuso do xarope de sacarose e viabilidade economica da pre-secagem osmotica de pessegoa / Cultivars, process variables, reuse syrup and economicv feasibility of the osmotic pre-driyng of peaches
The objective of the present study was to evaluate the industrialization of peach cultivars from the State of São Paulo, Brazil, in the semi-dried form, using a combined process involving osmotic pre-drying (OPD) and conventional hot air drying (CD). The aptness of the cultivars Douradão, Régis, Aurora-1 and Diamante was evaluated, using OPD with sucrose
Publicado em: 2010
-
5. Análise de sensibilidade paramétrica na modelagem da secagem de fertilizantes em secador rotatório
O secador rotatório figura entre os equipamentos de maior importância em processos de secagem de diversos produtos devido ao seu elevado desempenho e grande capacidade de processamento. Consiste de um tambor cilíndrico, ligeiramente inclinado em relação à horizontal, que gira em baixa velocidade. O interior do tambor é equipado com suspensores que col
Publicado em: 2010
-
6. Modeling and experimental study of hydrodynamic and drying characteristics of an industrial rotary dryer
The purpose of this work was to analyze the hydrodynamic and drying aspects of a rotary dryer used in a fertilizer industry. A set of equations to predict the solids holdup in the flights, the length of fall, the residence time of particles and the drying variables was evaluated by comparison to experimental measurements performed in an industrial rotary dry
Brazilian Journal of Chemical Engineering. Publicado em: 2009-06
-
7. Analise da secagem de residuo de leite de soja "Okara" em secadores de leito de jorro e de cilindro rotativo assistido a microondas / Drying of soy milk residue in the spouted bed dryer and rotary cylindrical dryer assisted by microwaves
The use of industrial residues has become more and more important to avoid the environment contamination and to make use of resources considered wastes in the chemical and food industries. Actually, the approximated soy milk production in the world is unknown; however, it is known that large amounts of its residue, named "Okara", are generated by its product
Publicado em: 2009
-
8. Project and assembling of pneumatic transport pilot unit in diluted phase for studying the relationship between the pressure drop and the distribution of granular particles into the cross section of industrial pipes / Projeto e montagem de unidade piloto de transporte pneumatico em fase diluida para estudo da relação entre a perda de carga e a distribuição de particulas granulares na seção transversal de dutos industriais
The pneumatic transport that involves the use of air particles to move materials through pipes is a major operation in various industries and chemical processes. Typical examples are systems for the conversion of energy from coal, catalytic cracking, drying and transport of solid and fine granular. The conventional pneumatic transport is often operated in di
Publicado em: 2009
-
9. Comparação do desempenho do secador roto-fluidizado com o secador rotatório convencional : secagem de fertilizantes
The objective of this work was to analyze the phenomena of mass and energy transfer between heat air and the granulated simple super-phosphate in rotary dryers in the versions: conventional with cascading and roto-fluidized. A study of fluid dynamics of flowing of particles in conventional rotary dryers was made with objective of determine the conditions tha
Publicado em: 2008
-
10. Estudo da fluidodinâmica e da secagem de um secador rotatório da indústria de fertilizantes
The dimensioning, the modeling and the simulation of the rotary dryers constitutes a big challenge. The drying involves mass and heat transfer, and fluid dynamics processes of the most different forms. Great part of the dryers projects are done according to empiricism and based on the experience of engineers and on the scale-up of prototypes. The purpose of
Publicado em: 2008
-
11. Estudo da fluidodinÃmica e da secagem de um secador rotatÃrio da indÃstria de fertilizantes
O dimensionamento, modelagem e simulaÃÃo de secadores rotatÃrios constituem em um grande desafio. A secagem envolve transferÃncias de calor e massa, e processos fluidodinÃmicos das mais diferentes formas. A maior parte dos projetos de secadores à feita por empirismo, com base na experiÃncia de engenheiros e âscale-upâ de protÃtipos. O objetivo do t
Publicado em: 2008
-
12. Modeling heat and mass transfer in the heat treatment step of yerba maté processing
The aim of this research was to estimate the leaf and twig temperature and moisture content of yerba maté branches (Ilex paraguariensis Saint Hilaire) during heat treatment, carried out in a rotary kiln dryer. These variables had to be estimated (modeling the heat and mass transfer) due to the difficulty of experimental measurement in the dryer. For modelin
Brazilian Journal of Chemical Engineering. Publicado em: 2007-03