Rubber Compound
Mostrando 1-12 de 19 artigos, teses e dissertações.
-
1. Protein Removal from Natural Rubber Latex with Fe3O4@Al2O3 Nanoparticle
The presence of protein in the natural rubber latex for the medical device manufacture seems to be the most considered compound due to its allergic effect. Magnetic coated alumina (Fe3O4@Al2O3) has been known as an adsorbent for organic substrates due to its performance through physical and/or chemical interaction. In the current study, we tried to figure ou
J. Braz. Chem. Soc.. Publicado em: 2021-02
-
2. Estrategia para la optimización de un compuesto de caucho con aceite de soja utilizando diseños de experimentos
ABSTRACT When a rubber component is made, is necessary to start from a “rubber compound” which may be composed of one or more polymers and various additives or fillers. The development of an elastomer mixture to produce a compound with a specific end-use is complicated in the field of rubber technology. Therefore, the successful development of a compound
Matéria (Rio J.). Publicado em: 19/07/2018
-
3. Epoxidized natural rubber and hydrotalcite compounds: rheological and thermal characterization
Abstract Epoxidized natural rubber (ENR) and synthetic non-modified hydrotalcite (HT) compounds were prepared and evaluated. Natural rubber (NR) was epoxidized with 20.6% of epoxy groups from a chemical modification of the latex. A sulfur-based curing system formulation with accelerators was used. The amounts of HT in the ENR-HT compositions was varied betwe
Polímeros. Publicado em: 21/09/2017
-
4. Mixing process influence on thermal and rheological properties of NBR/SiO2 from rice husk ash
Abstract Silica was extracted from rice husk ash (RHA) by a sequence of reactions to produce nanosilica. Two laboratory routes, co-coagulation and spray drying, were used to incorporate the nanosilica into the rubber matrix. Samples were characterized regarding filler incorporation efficiency, thermal stability, rheological behavior and morphology. Thermogra
Polímeros. Publicado em: 29/06/2017
-
5. Sugarcane bagasse ash: new filler to natural rubber composite
Waste recycling has been the subject of numerous scientific researches regarding the environmental care. This paper reports the redirecting of sugarcane bagasse ash (SBA) as new filler to natural rubber (NR/SBA). The NR/SBA composites were prepared using an opened cylinder mixer to incorporate the vulcanization agents and different proportions of residue (SB
Polímeros. Publicado em: 2014-12
-
6. Flow visualization & extrudate swell behavior of natural rubber compound in annular die capillary rheometer
This research aims to study the flow pattern and extrudate swell properties of a Natural Rubber (NR) compound in a constant shear rate capillary rheometer, using two types of annular die: convergent annular and divergent annular. Results revealed that flow patterns that occurred in the barrels of both types of annular dies were significantly different, espec
Polímeros. Publicado em: 2014-08
-
7. Development of Polyamide 6/Compound by Recycled Rubber Blends Using Graphitized Polyethylene or Polypropylene with Maleic Anhydride as Compatibilizer Agent
ABSTRACT: The toughening of polyamide 6 is desirable for many applications and may be obtained by adding a phase to the elastomeric matrix. However, this leads to a loss in its rigidity characteristics. Therefore, this study aimed at developing blends of polyamide 6/compound by recycled rubber (SBR-R), with the addition of compatibilizer graphitized polyethy
J. Aerosp. Technol. Manag.. Publicado em: 2013-06
-
8. Pó de borracha reutilizado na confecção de compostos de borracha natural para a produção de peças de engenharia do setor automotivo
Due to the cross-linked structure and the presence of antidegradants, rubber products decomposition is very hard and the disposal of waste material has been caused many environmental problems. Therefore, rubber recycling and the use of it as raw material in fresh rubber compounds are strongly necessary to achieve more sustainable technological projects. The
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2012
-
9. Análise qualitativa e quantitativa de compostos de borracha destinados à fabricação de revestimentos de embreagem / Qualitative and quantitative analysis of rubber compounds destined for clutch facings manufacture
In this work it was developed a methodology for qualifying and quantifying rubber compounds destined for facings manufacture. These compounds are formed by a large number of components which use, beyond the elastomeric base, a resin that is used as a process agent, vulcanization agents and different fillers, each one with a specific function. The elastomeric
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/05/2011
-
10. More about the role of 2,6-dichlorophenol in tick courtship: identification and olfactometer bioassay in Amblyomma cajennense and Rhipicephalus sanguineus
This study aimed to identify 2,6-dichlorophenol (2,6-DCP) in Amblyomma cajennense and to evaluate its role in A. cajennense and Rhipicephalus sanguineus courtship. Hexanic extract from attractive females was purified by solid phase extraction and the phenol was identified by the single ion monitoring method using GC/MS. In an olfactometer, the responses of A
Memórias do Instituto Oswaldo Cruz. Publicado em: 2008-02
-
11. Reproductive behavior and sex pheromone identification of Pseudaletia sequax (Lepidoptera: Noctuidae) / Comportamento reprodutivo e identificação de feromônio sexual de Pseudaletia sequax (Lepidoptera: Noctuidae)
The effects of pupal period and age on calling behavior of virgin females of Pseudaletia sequax were determined. Larvae were reared on artificial diet. Calling behavior of groups of females of similar age of pupation was observed every 10 minutes for six days at reversed photoperiod. Females were considered calling when they had assumed a characteristic posi
Publicado em: 2007
-
12. Obtenção e caracterização de compósitos celulares à base de resíduo de SBR proveniente da indústria calçadista
Rubber compositions of copoly(butadiene-styrene) (SBR) with incorporation of an expanded residue from shoe industry (SBR scraps) were developed aiming later application to obtain cellular composites.n The amounts of the incorporated SBR-r varied from 0 to 30 phr. The SBR scraps were ground and the obtained powder (SBR-r) was characterized by chemical composi
Publicado em: 2007