Sliding With Friction
Mostrando 1-12 de 41 artigos, teses e dissertações.
-
1. Avaliação tribológica de óleos hidráulicos biodegradável e mineral com deslizamento entre as ligas de Cu-Zn e WC-CoCr
RESUMO A correta seleção dos óleos lubrificantes e das superfícies de contato melhoram o desempenho e reduzem o consumo de energia das máquinas Por isso, a engenharia de superfícies propõe novos revestimentos aos quais seu comportamento tribológico combinado com o uso de óleos biodegradáveis em componentes de sistema hidráulicos, não são conheci
Matéria (Rio J.). Publicado em: 25/11/2019
-
2. Efeito do metal de adição na resistência ao desgaste por deslizamento de um aço estrutural soldado por GMAW
RESUMO O objetivo do presente trabalho foi avaliar o efeito do metal de adição na soldagem, e das microestruturas resultantes, na resistência ao desgaste de juntas soldadas de um aço estrutural ASTM A242, que possui resistência à corrosão atmosférica e é utilizado na fabricação de vagões destinados ao transporte de minério. As amostras foram sol
Matéria (Rio J.). Publicado em: 16/09/2019
-
3. Integrated Experimental Approach for Alloying of Surface Layer Ti6Al4V+B4C Metal Matrix Composites using Laser Treatment
Surface engineering applications have brought the titanium and its alloys into the limelight in the manufacturing industries such as the aerospace, automobile, marine, chemical processing industry, nuclear power and biomedical. Despite the growths experienced in the use of this material, it is plagued with poor wear behaviour, especially when in contact with
Mat. Res.. Publicado em: 17/01/2019
-
4. Effect of Experimental Parameters on Wear Response of Thermally Sprayed Carbide Based Coatings
Friction and abrasive wear response of WC-12 Co and Cr3C2-25 NiCr coatings was studied. Abrasive wear experiments were conducted with SiC abrasive particles with varying load and sliding speeds. The results were analyzed using SEM, XRD and XPS observations of worn surfaces, wear debris and worn out abrasive paper. Friction coefficient diminished with rise in
Mat. Res.. Publicado em: 08/11/2018
-
5. The Contribution of Mechanical Spectroscopy to Understanding Grain Boundary Sliding
This review paper shows that grain boundary sliding (GBS) is a general phenomenon occurring in all classes of inorganic materials: ceramics, metals and composite materials. The occurrence of relaxations attributed to GBS is also quite general and therefore the mechanical spectroscopy constitutes a sensitive and universal technique to study such phenomenon. G
Mat. Res.. Publicado em: 25/10/2018
-
6. Carbon based DLC films: Influence of the processing parameters on the structure and properties
ABSTRACT Hydrogenated carbon-based films, such as DLC (“Diamond Like Carbon”), have interesting properties such as excellent tribological behavior, low friction coefficient, high superficial hardness and good wear resistance; they are chemically inert and highly corrosion resistant. They are deposited by means of PACVD (plasma-assisted chemical vapor dep
Matéria (Rio J.). Publicado em: 19/07/2018
-
7. Estabilidad térmica de aleaciones de magnesio Procesadas por Friccion-Agitación (FSP)
ABSTRACT Superplasticity is defined by an extended plastic deformation previous to fracture, generally at high temperatures. In the mode of fine structures superplasticity, grain boundary sliding is the controlling mechanism. To achieve this fine grained structure it could be used any Severe Plastic Deformation (SPD) process like Friction Stir Processing (FS
Matéria (Rio J.). Publicado em: 19/07/2018
-
8. Investigation on Friction and Wear Properties of High-Temperature Bearing Steel 9Cr18Mo
This paper presented a study of friction and wear on 9Cr18Mo when rubbed against other materials (steel-304, steel-440C, steel-GCr15 or silicon nitride ceramic ball) at high temperature conditions. Friction and wear tests were carried out with universal a friction and wear testing machine. The wear morphology was analyzed by a Nanovea three-dimensional profi
Mat. Res.. Publicado em: 05/04/2018
-
9. Dry Sliding Wear Behaviour of Aluminium 5059/SiC/MoS2 Hybrid Metal Matrix Composites
The present study is to investigate the influence of weight percentage of silicon carbide (SiC) (5,10 %, 15%) and particle size (10,20,40µm) of SiC and constant 2% of Molybdenum disulphide(MoS2)is reinforced with aluminium matrix. Wear performance of the composite was carried out through pin-on-disc method to calculate friction coefficient and wear resistan
Mat. Res.. Publicado em: 28/09/2017
-
10. Effect of surface finishing on friction and wear of Poly-Ether-Ether-Ketone (PEEK) under oil lubrication
Abstract The tribological properties of poly-ether-ether-ketone (PEEK) containing 30% of carbon fiber were studied in an oil-lubricated environment and different surface finishing of the metallic counterbody. Four different finishing processes, commonly used in the automotive industry, were chosen for this study: turning, grinding, honing and polishing. The
Polímeros. Publicado em: 08/12/2016
-
11. Investigation of Adhesion and Tribological Behavior of Borided AISI 310 Stainless Steel
In the present study, the effects of the boriding process on adhesion and tribological properties of AISI 310 steel were investigated. Boriding was performed in a solid medium consisting of Ekabor-II powders at 1123 and 1323K for 2 and 6 h. The boride layer was characterized by optical microscopy, the X-ray diffraction technique and the micro-Vickers hardnes
Matéria (Rio J.). Publicado em: 2016-03
-
12. Study on friction and wear behavior of SAE 1045 steel, reinforced nylon 6.6 and NBR rubber used in clutch disks
The friction and wear properties of AISI 1045 steel, nylon 6.6 composites with different types and percentages of reinforcement and a nitrile rubber, Alpha 66, were submitted to sliding wear tests. The five types of nylon 6.6 composites tested generated matching, low values for the coefficient of friction. This may be due to the greater influence of the nylo
Mat. Res.. Publicado em: 2014-12