Standard Reference Materials
Mostrando 1-12 de 52 artigos, teses e dissertações.
-
1. Behavior of plaster with water-repellent additive under natural aging
Abstract This research evaluates the behavior of plaster with a water-repellent additive when submitted to a natural aging process. Casting plaster and silane/siloxane-based water-repellent were used as materials. The water/plaster ratio was set at 0.7 and the contents of 0.2% and 0.4% of water-repellent were used, in relation to the plaster mass. Plaster pa
Cerâmica. Publicado em: 2022
-
2. Performance of 68Ga-labeled prostate-specific membrane antigen ligand positron emission tomography/computed tomography in the diagnosis of primary prostate cancer: a systematic review and meta-analysis
ABSTRACT Objective: To explore the feasibility of 68Ga-PSMA PET/CT in diagnosing primary prostate cancer. Materials and Methods: Embase, PubMed and Cochrane Library databases were searched for studies published before July 2020. The studies that used 68Ga-PSMA PET/CT for detecting primary prostate cancer, and pathological biopsy as the reference standard w
International braz j urol. Publicado em: 2022
-
3. Evaluation of the use of silica-alumina refractory waste as a supplementary cementitious material
Abstract The use of supplementary cementitious materials (SMCs) is one of the three essential factors for the sustainability of the cement industry. To reduce CO2 emissions, several studies have introduced new methods for the utilization of industrial wastes such as the addition into cementitious materials. The objectives of this study were to chemically and
Cerâmica. Publicado em: 2021-06
-
4. Associations of circulating irisin with 24-h blood pressure, total and visceral fat, and metabolic parameters in young adult hypertensives
ABSTRACT Objective: Some experimental and clinical studies suggest a possible role of irisin in central and peripheral regulation of blood pressure. The purpose of the study was to assess the associations between serum irisin levels, total and visceral fat, metabolic parameters, and blood pressure pattern during 24-h monitoring (ABPM). Materials and method
Arch. Endocrinol. Metab.. Publicado em: 2021-04
-
5. Determining Mercury in Sediment Samples by Extraction Using a Novel-Chelating Reagent Dithiothreitol (DTT) Followed by Cold Vapor Atomic Fluorescence Spectrometry (CV-AFS)
A new analytical protocol has been developed for the determination of mercury in surface sediments using dithiothreitol (DTT) as a new chelating reagent for the extraction. This protocol requires a small sample mass (250 mg), 4.0 mL of a 0.1 M (pH = 9.0) aqueous DTT solution, and sonication for 30 min, followed by cold vapor atomic fluorescence spectrometry
J. Braz. Chem. Soc.. Publicado em: 2020-12
-
6. Quantification of Arsenic, Cadmium, Mercury and Lead in Pineapple: Method Development, Validation and Evaluation of In-House Reference Materials
A method for quantification of arsenic, cadmium, mercury, and lead in pineapple using inductively coupled plasma-mass spectrometry (ICP-MS) was developed, validated, and used to test the homogeneity and stability of in-house reference materials. The method was tested at the regulation levels given by the Food and Agriculture Organization of the United Nation
J. Braz. Chem. Soc.. Publicado em: 2020-06
-
7. Chlorine and Fluorine Determination in Eye-Pencil: Development of an Eco-Friendly Sample Preparation Method for Ion Chromatography Analysis
In this paper, a feasible method was proposed for the chlorine and fluorine determination in eye-pencil samples using ion chromatography (IC). The microwave-induced combustion (MIC) was used to digest up to 200 mg of a sample, with 50 mg of microcrystalline cellulose as a combustion aid and only water for analytes absorption. Cl and F recoveries were 105 ±
J. Braz. Chem. Soc.. Publicado em: 21/10/2019
-
8. Automated immature granulocyte count in patients of the intensive care unit with suspected infection
RESUMO Introdução: Diagnosticar infecções em pacientes da unidade de terapia intensiva (UTI) é vital para implementar terapias apropriadas. A contagem automatizada de granulócitos imaturos (IG) em analisadores hematológicos é rápida e sem custos adicionais. A taxa de IG elevada está associada a infecções. Objetivos: Avaliar IG como indicador de
J. Bras. Patol. Med. Lab.. Publicado em: 01/08/2019
-
9. Contrastive Research on Electrical Contact Performance for Contact Materials of Cu-SnO2 and Cu-ZnO2 Alloys
Herein, SnO2- and ZnO2-doped (1.5 wt.%) composite Cu powder was prepared by mechanical alloying (MA) respectively, and both the contact materials of oxide-doped Cu alloys were subsequently obtained by canned hot-pressing powder sintering with hot extrusion combined. Scanning electron microscopy (SEM), laser scanning confocal microscopy (LSCM) and self-design
Mat. Res.. Publicado em: 25/04/2019
-
10. Estimación de propiedades mecánicas de chapa de acero inoxidable 304L mediante ensayos SPT
ABSTRACT The mechanical characterization of materials by small specimen testing has growing interest in Structural Engineering. Small Punch Test (SPT) is applied to estimate mechanical properties of samples that can be extracted from components or structures without affecting service operation. In this paper the development of the test device is reported, co
Matéria (Rio J.). Publicado em: 19/07/2018
-
11. Métodos temporales para determinar deformaciones límite en chapas metálicas
ABSTRACT The forming limit diagram (FLD) –broadly used to characterize sheet-metal formability– is made by means of strain measurement over the surface of stretched samples and the subsequent determination of limit-strain values associated with the onset of necking. Currently, researchers can make strain measurements with digital image-correlation analys
Matéria (Rio J.). Publicado em: 19/07/2018
-
12. Replacement of fluorspar in the desulfurization of hot metal
Abstract In the steel industry, lime is used as a desulfurizing agent and fluorspar as flux in the hot metal desulfurization process. However there are environmental concerns regarding the use of fluorspar, even when its harmful effects are not fully known. In order to reduce such risks and also to anticipate possible future restrictions, which could undermi
REM, Int. Eng. J.. Publicado em: 2018-04