Steel Alloys
Mostrando 1-12 de 118 artigos, teses e dissertações.
-
1. Analysis of Residual Stress by the Hole-Drilling Method and Hardness in Dissimilar Joints of Austenitic Stainless Steel AISI 316L and Inconel 718 Alloy by Autogenous GTAW Process
Stainless steel and nickel alloy have high corrosion resistance in high-temperature environments due to the high Cr content present in their chemical composition, being widely used in components of nuclear reactors, petrochemical industries, etc. Through proper processes and procedures, it becomes possible to join these alloys. However, this union can genera
Mat. Res.. Publicado em: 02/12/2019
-
2. Corrosion Resistance of Cu-Alloyed Precipitation Hardenable Duplex Stainless Steel ASTM A890 Grade 1B
Duplex stainless steels (DSS) are corrosion resistant alloys largely used in chemical and petrochemical industries. Some commercial DSS contain 0.5-1.0% copper addition to improve the corrosion resistance by reducing the corrosion rate in non-oxidizing environments. Higher copper addition (≥ 2%) can also hard by precipitation, especially when fine copper p
Mat. Res.. Publicado em: 07/11/2019
-
3. Phase Separation and Development of the Microstructure for Stainless Steel to Copper Alloy Weld Joints Using a Fiber Laser
ABSTRACT Stainless steel and copper alloys joints are often applied in aerospace, marine and power industries where both high thermal and electrical conductivity (Cu) and corrosion resistance (steel) are required. In the aerospace industry, in particular for the combustion chamber of rocket engines, copper and steel combinations offer perfect materials selec
J. Aerosp. Technol. Manag.. Publicado em: 10/10/2019
-
4. Study of behavior alloy Ti and 316L in to simulated body fluid by electrochemical techniques
ABSTRACT In this work, Ti-316L stainless steel was produced, and its electrochemical behavior was characterized. Ti-steel alloys were produced using an induction furnace, by mixing commercial Ti and 316L stainless steel. X-ray diffraction analyses showed the presence of both the materials, Ti and 316L, in the samples produced. The elemental composition of th
Matéria (Rio J.). Publicado em: 16/09/2019
-
5. Effect of Sigma Phase Precipitated at 850 °C on Corrosion Behaviour of UNS S82441 Duplex Stainless Steel
ABSTRACT Duplex stainless steels (DSS) are alloys with binary microstructure consisting of ferrite (δ) and austenite (γ), combining high mechanical properties and corrosion resistance by pitting and stress corrosion, due to the two phases austenite/ferrite. However, the formation of secondary and intermetallic phases, during solidification processes, heat
Matéria (Rio J.). Publicado em: 16/09/2019
-
6. Corrosion Behavior of 316L and Alloy 182 Dissimilar Weld Joint with Post-Weld Heat Treatment
ABSTRACT Austenitic stainless steel and nickel-base alloys welds are widely used in nuclear reactor components, plants of energy generation, chemical, and petrochemical industries, due to their high corrosion resistance. The post weld heat treatments (PWHT) are generally applied to welding in order to relieve the welding residual stress. The aim of this work
Matéria (Rio J.). Publicado em: 16/09/2019
-
7. Study of the metallurgical bond between 316 steel substrates and NiCrAlY coating sprayed by HVOF and irradiated with a low power CO2 laser
RESUMO Considerando a importância do desenvolvimento de novos materiais ao longo dos últimos anos; os pesquisadores vêm estudando soluções eficazes através do uso de revestimentos de alta dureza para aplicação em ferramentas de corte e matrizes de conformação. Revestimentos de carboneto de tungstênio (WC) são um dos mais utilizados em sistemas de
Matéria (Rio J.). Publicado em: 16/09/2019
-
8. Análise comparativa entre a têmpera e partição versus a têmpera e revenimento para o aço SAE 4340
RESUMO Um novo tratamento térmico tem sido pesquisado recentemente, cuja denominação é têmpera e partição (T&P), com o intuito de criar aços com austenita estável em sua microestrutura. Inicialmente, esse tratamento foi realizado em aços de alto silício, não obstante, seu potencial alcança outros diversos materiais como os de baixa liga contendo
Matéria (Rio J.). Publicado em: 16/09/2019
-
9. Glycerol Effect on the Corrosion Resistance and Electrodeposition Conditions in a Zinc Electroplating Process
Zinc electrodeposition is an economical process of Zn coating compared to conventional galvanic process. The galvanizing process is used in various industrial sectors to protect ferrous alloys during the corrosion process. In buildings, the galvanizing process is widely used to coat mortar protective screens. The electrodeposition of zinc has a relatively lo
Mat. Res.. Publicado em: 19/08/2019
-
10. Corrodibility and Adherence of Reinforced Concrete Rebars Electroplated with Zinc and Zinc-Nickel Alloys
Reinforced concrete is the main structural material used in the world in the construction of bridges, roads and commercial and residential buildings. One effective method for preventing corrosion of steel reinforcement is the application of galvanic coatings to the reinforcement itself. The present study evaluated the performance of three groups of reinforci
Mat. Res.. Publicado em: 15/07/2019
-
11. Uso de técnicas electroquímicas para determinar la resistencia a la corrosión localizada de un acero inoxidable súper dúplex UNS S-32760
ABSTRACT Super duplex stainless steel UNS S-32760 is one of the most commonly used alloys in several industrial applications, due to its high corrosion resistance. However, this characteristic is affected when the alloy is exposed to aggressive environments. In this work, the effect of temperature on the critical potential of super duplex stainless steel was
Matéria (Rio J.). Publicado em: 20/05/2019
-
12. Influência da microestrutura na resistência ao desgaste microabrasivo de ligas de F-Cr-C e Fe-Cr-C-Nb
ABSTRACT Neste trabalho é feita uma avaliação da influência do teor de cromo e da combinação do cromo e nióbio em ligas de revestimento duro do tipo Fe-Cr-C, na microestrutura e propriedades que envolvam a resistência ao desgaste microabrasivo. Vários estudos têm sido realizados em busca de informações conclusivas sobre este sistema em condiçõe
Matéria (Rio J.). Publicado em: 20/05/2019