Structural Mortar
Mostrando 1-12 de 30 artigos, teses e dissertações.
-
1. Mechanical properties and fractography of cement-based composites reinforced by natural piassava and jute fibers
Abstract Today’s demand for environmentally friendly and energy-efficient solutions to the construction industry has driven researchers to match natural resources with traditional technics to develop new building technologies. However, there are literature limitations about the correlation of fiber-matrix interface with the failure of natural fibers in mor
Cerâmica. Publicado em: 2022
-
2. Effects of the addition of graphene on the compressive strength of geopolymeric mortar developed from k-feldspar mining waste
Abstract Contemporary organizations are showing a growing interest in the reuse of solid waste from industrial processes with the intention of reducing environmental impacts and reducing costs. The mining activity is one of the main waste generators in Brazil. In parallel, geopolymeric materials have been gaining prominence in studies that make it a possible
REM, Int. Eng. J.. Publicado em: 2021-09
-
3. Estudo experimental do fluxo de umidade em argamassas de cal aérea
RESUMO Uma parte significativa do património histórico construído ao redor do mundo é constituída de alvenaria estrutural, com juntas preenchidas com argamassa. Nesses sistemas estruturais, a argamassa usualmente representa uma parcela pequena/moderada do volume total da estrutura, no entanto, a argamassa é reconhecida como a principal fonte de movimen
Matéria (Rio J.). Publicado em: 25/11/2019
-
4. Concrete block structural masonry beam shear design: theoretical and experimental analysis and recommendations to the brazilian standards
Resumo Vigas são submetidas à flexão e cisalhamento, sendo esse último esforço o tema desta pesquisa. O objetivo deste trabalho é analisar especificações para dimensionamento ao esforço cortante de vigas de alvenaria estrutural em blocos de concreto, a partir de extensa avaliação da literatura e de ensaios experimentais aqui relatados. A partir de
Rev. IBRACON Estrut. Mater.. Publicado em: 23/09/2019
-
5. Study of cracks in concrete target under deep penetration by a projectile
Abstract A large number of cracks occur in concrete structure after projectile penetration. The study of crack distribution and propagation process is the basis of damage assessment, structural repair and high dynamic fracture mechanism. In this paper, wire saw cutting, X-ray computed tomography (X-CT) and mechanical property testing of damaged concrete were
Lat. Am. j. solids struct.. Publicado em: 14/03/2019
-
6. Assess of hollow clay block masonry wallets under high temperature
ABSTRACT The main goal of this study was the behavioral assessment at high temperatures of masonry wallets built with different geometries of hollow clay blocks. In total, four type of structural wallets were erected; blocks of 15 x 20 x 30 cm nominal dimensions (width x height x length) and compressive strength of 7, 10, 15 and 18 MPa were built, employing
Matéria (Rio J.). Publicado em: 18/10/2018
-
7. Comparative study of the characteristics of nano silica - , silica fume - and fly ash - incorporated cement mortars
The structural characteristics of cement mortars, impregnated with nano silica (NS), silica fume (SF) and fly ash (FA), were comparatively studied using Fourier transform infrared spectrometer (FTIR), thermogravimeter-differential thermogravimeter (TG-DTG) and scanning electron microscope (SEM). The mechanical strengths of the specimens were determined at ea
Mat. Res.. Publicado em: 09/05/2014
-
8. Blocos para execução de alvenaria de vedação empregando garrafas pet: avaliação mecânica e termoacústica
Recycling and reuse of materials is the most evident solution regarding sustainable development. One relevant aspect to this development refers to the integration of engineering to devise ways that enable the reuse of materials considered as waste, but with great potential of applicability in the building industry itself, through the generation of appropriat
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 30/05/2012
-
9. Determination of the numerical parameters of a continuous damage model for the structural analysis of clay brick masonry
Models based on the continuous damage theory present good responses in representing the nonlinear behavior of reinforced concrete structures with loss of strength and stiffness of the material. However, damage theory is rarely employed in the analysis of masonry structures and numerical simulations are currently performed mostly by Finite Element Method form
Mat. Res.. Publicado em: 23/10/2012
-
10. Desenvolvimento de método para medida de permeabilidade superficial de revestimentos de argamassa. / Development of method for measuring the surface permeability of coating mortar.
The phenomenon of permeability refers to the ability with which a fluid is transported through a porous medium, driven by pressure gradient between the material and the external environment. Degradation agents are conducted to the interior of mortar and concrete driven through such a phenomenon. Therefore, it is the permeability as a key parameters for durab
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 25/05/2011
-
11. Cement - steatite composites reinforced with carbon fibres: an alternative for restoration of brazilian historical buildings
Steatite is a mineral which has been employed in the carving of elements in facades of Brazilian historical buildings and churches since the 17th century. Over the years, many of those historical buildings suffered the consequences of weathering with a current need for restoration. Recently a special cement-based mortar containing additions of fine powder wa
Materials Research. Publicado em: 25/02/2011
-
12. Influência do tipo de argamassamento e da utilização de peças de ajuste dimensional na resistência à compressão da alvenaria de blocos de concreto / Influence of mortar bedding type and use of adjustment dimensional parts in the compressive strength of masonry of concrete blocks
Currently, the structural masonry still has some advantages in the construction industry as compared with conventional systems, however it should continue to be studied for a better utilization of the system. This research studies the change of compressive strength of masonry walls due to the placement of mortar only on the sides of the blocks compared to th
Publicado em: 2011