Structure Design
Mostrando 1-12 de 1423 artigos, teses e dissertações.
-
1. A Defected Ground Structure Based on Matryoshka Geometry
Abstract A Defected Ground Structure, DGS, based on matryoshka geometry is described in this paper. The proposed DGS geometry is outlined and initial design equations are presented. Four prototypes, with resonant frequencies 2.17 GHz, 2.44 GHz, 2.99 GHz and 3.73 GHz, were designed, fabricated and characterized, observing a good agreement between measured and
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
2. A Compact Dual-Band Self-Diplexing MIMO Patch Antenna for ISM and X-Band Communications
Abstract A compact, dual-band, and self-diplexing MIMO patch antenna with a shared aperture is presented for Industrial scientific medical (ISM) band and X-band communications. The structure consists of two orthogonal feed lines and a rectangular slot in a square patch. The size of the FR4 substrate is 50 × 50 × 1.6 mm3. The designed structure operates at
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
3. Design and Implementation of Microwave Dual-Band Pass Interdigital Filter Using an Analytical Approach
Abstract In this paper, benefiting from frequency transformation between the normalized frequency domain of low-pass prototype frequencies and the real frequency domain of the filter, a purely analytical procedure for dual-band filter design is used. The coupling matrix of the filter is analytically extracted, without the need to perform numerical optimizati
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
4. Microstrip 3-Bit Fractal-based Phase Shifter
Abstract This paper presents the implementation of a 3-bit microstrip fractal-based phase shifter operating in the 430 MHz to 470 MHz frequency range. The fractal structure is used to confine different delay line lengths in the same area due to the space-filling properties of the used Hilbert fractal curve. The proposed design has three bits corresponding to
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
5. A High-Selectivity Bandpass Filter Using Dual-Mode Coupling Resonator
Abstract In this work, a new model of high selectivity dual-mode bandpass filter is presented. The proposed filter consists of a set of coupled lines with a dual-mode adjustable response in its design process. An improvement in selectivity is presented by combining the dual-mode element with a classic band rejection structure, thus making it possible to intr
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
6. Scale of Organizational Structure Components (SOCS): Evidence of Validation of a Theoretical Model
RESUMO O objetivo deste artigo é propor e validar um modelo de escala de componentes da estrutura organizacional (ECEO), a partir dos componentes latentes identificados no estudo exploratório de Trigueiro-Fernandes (2014), que se inspirou nos parâmetros de design de Mintzberg (2012). Para tanto, a pesquisa foi realizada em 26 unidades organizacionais púb
BBR. Brazilian Business Review. Publicado em: 2022
-
7. Evaluation of moisture content variation on strength and stiffness properties of Cedrella sp. wood specie
Abstract In order to evaluate the influence of moisture content on wood physical and mechanical properties, the present research analyzed the influence of moisture content variation on Cedrella sp. on 12 strength and stiffness properties, considering 12% moisture content up to Fiber Saturation Point (FSP) were considered. Brazilian Standard consider a correc
REM - International Engineering Journal. Publicado em: 2022
-
8. DESIGN AND EXPERIMENT OF SELF-PROPELLED SYSTEM FOR PADDY FIELD WEEDER BASED ON THE INTERACTION MECHANISM OF WHEEL-SOIL
ABSTRACT Aiming at the low mechanization of paddy field weeding and lack of dedicated agricultural machinery for paddy field weeding in China, a self-propelled system of paddy field weeding machine was designed. The overall structure and working principle of self-propelled system were illustrated and analyzed. The interaction mechanism of wheel-soil during w
Engenharia Agrícola. Publicado em: 2022
-
9. Challenges of TiO2-composite, as a visible active photocatalyst material for SARS-CoV-2 antiviral compared with the other viruses
The efforts in dealing with COVID-19 in various aspects are continuously being carried out, such as the photocatalytic process. Interestingly, TiO2 plays an important role as an environmentally friendly photocatalyst with a visible and UV absorption range. The increase in the antiviral performance of this compound is further maximized by formulating TiO2-bas
Química Nova. Publicado em: 2022
-
10. Bioprosthetic Aortic Valve Degeneration: a Review from a Basic Science Perspective
Abstract Introduction: The increase in the prevalence of aortic stenosis due to an aging population has led to an increasing number of surgical aortic valve replacements. Over the past 20 years, there has been a major shift in preference from mechanical to bioprosthetic valves. However, despite efforts, there is still no "ideal" bioprosthesis. It is crucial
Brazilian Journal of Cardiovascular Surgery. Publicado em: 2022
-
11. Prevalence of chondromalacia patella according to patella type and patellofemoral geometry: a retrospective study
Abstract BACKGROUND: The relationships between the morphometric structure of the patellofemoral joint, patella type and chondromalacia patella are still a matter of debate. OBJECTIVE: To identify the prevalence of chondromalacia patella by determining the patella type and making patellofemoral morphometric measurements. DESIGN AND SETTING: Retrospective c
Sao Paulo Medical Journal. Publicado em: 2022
-
12. Design and Performance Study of Single and Multi-Layered Fractal Based Miniaturized Patch Antennas for 2.4 GHz Applications
Abstract The design and characterization of single and multi-layered miniaturized microstrip antennas resonating at 2.4 GHz are proposed. The miniaturization is accomplished by fractal Defected Ground Structure (DGS). The DGS used for miniaturization is a Modified Minkowski Fractal DGS (M-MFDGS). The proposed size reduction process with M-MFDGS follows the s
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-06