Surface Finishing
Mostrando 1-12 de 87 artigos, teses e dissertações.
-
1. Analysis of the Dynamic Stability of Ball-End Milling of AISI D6 Hardened Steel
AISI D6 hardened steel is a difficult to cut material that it is employed in mould and die manufacturing where long ball-end mills are frequently required to machine deep cavities. This condition can lead to excessive vibration between tool and workpiece resulting in a poor surface finishing and reduced tool life. This work analyses the dynamic stability of
Mat. Res.. Publicado em: 02/12/2019
-
2. Productivity and Superficial Quality of an Aspherical Die Using CAD/CAM
ABSTRACT Nowadays, it is hard to imagine modern industry without the manufacturing and design software aided by computer, known as CAD/CAM, once the search for excellence in complex geometry parts, reduced time, quality assurance and interchangeability is increasing. Within this quest, the CAD/CAM platform has become a significant factor in manufacturing, es
Matéria (Rio J.). Publicado em: 16/09/2019
-
3. Aplicação da técnica de CAMQL na retificação cilíndrica externa do aço AISI 4340 utilizando rebolo de CBN
RESUMO O processo de retificação possui como características o bom acabamento superficial e alta precisão dimensional e geométrica. Assim, peças usinadas por este processo possuem um alto valor agregado por se tratar de um processo de acabamento que é comumente realizado nas últimas etapas da fabricação. Um fator limitador do processo de retificaç
Matéria (Rio J.). Publicado em: 16/09/2019
-
4. Obstructive urolithiasis in growing-finishing pigs
RESUMO: Urolitíase obstrutiva é uma enfermidade caracterizada pela presença de urólitos no trato urinário, com consequente obstrução das vias de excreção. Este artigo descreve os achados epidemiológicos e clínico-patológicos de 22 surtos de urolitíase em suínos de crescimento e terminação no Sul do Brasil. Os suínos afetados eram machos e cl
Pesq. Vet. Bras.. Publicado em: 18/07/2019
-
5. COATING PERFORMANCES OF CRIMEAN JUNIPER (Juniperus excelsa M. BIEB.) WOOD
ABSTRACT The purpose of this study is to determine the varnish layer hardness and varnish adhesion strength of the varnished Crimean juniper (Juniperus excelsa M. Bieb.) wood growing naturally in the Kastamonu region of Turkey. Test samples were varnished with UV-resistant polyurethane alkyd resin high gloss varnish (PAV) and water-based acrylic resin gloss
CERNE. Publicado em: 20/05/2019
-
6. Efeito da mesogeometria da broca e das condições de lubrirrefrigeração sobre o acabamento do furo em aço ARBL DIN S700MC
RESUMO O trabalho apresenta um estudo sobre os efeitos decorrentes da modificação da mesogeometria de uma broca helicoidal de metal-duro com revestimento de TiAlN sobre o acabamento superficial do aço de alta resistência e baixa liga DIN S700MC utilizando diferentes condições de aplicação de fluidos lubrirrefrigerantes (em abundância, em mínima qua
Matéria (Rio J.). Publicado em: 20/05/2019
-
7. Surface Topography, Gloss and Flexural Strength of Pressable Ceramic After Finishing-Polishing Protocols
Resumo O objetivo deste estudo foi avaliar o efeito de diferentes protocolos de acabamento e polimento na rugosidade da superfície, brilho, resistência à flexão biaxial e morfologia de cerâmica prensada. Trinta discos de cerâmica (12x1 mm) foram produzidos e divididos em cinco grupos (n=6): CT- controle (glaze); DA- ponta diamantada de granulação fin
Braz. Dent. J.. Publicado em: 04/04/2019
-
8. Recubrimientos porosos de dióxido de titanio sintetizados por oxidación anódica
ABSTRACT Titanium dioxide is one of the most used materials in heterogeneous photocatalysis due to its commercial availability, low cost, chemical stability, low toxicity and high photocatalytic activity. One of the most efficient and economical methods to obtain TiO2 coatings is the plasma electrolytic oxidation. In this anodization process, a direct curren
Matéria (Rio J.). Publicado em: 19/07/2018
-
9. Evaluation of the oil flow using the MQL technique applied in the cylindrical plunge grinding of AISI 4340 steel with cbn grinding wheel
Abstract The grinding process is defined as an abrasive cutting action of a tool known as grinding wheel, which is submitted to high rotations, promoting excellent finishing and accuracy in dimensions, respecting the parameters established in each project. During the machining, the cutting edges of the abrasive grains undergo wearing and this increases the c
REM, Int. Eng. J.. Publicado em: 2018-07
-
10. Evaluation of the Influence of Surface Finishing on the Corrosion Resistance of HVOF Applied Inconel 625 Coatings on Steel
In this work, the corrosion resistance of Inconel 625 coatings applied to AISI 4140 steel plates was evaluated. Coatings were produced by High Velocity Oxygen Fuel (HVOF) by use of two different equipment which use either kerosene (liquid) or propane (gas) as fuel. The resulting coatings were evaluated in two conditions: as-deposited and after a surface fini
Mat. Res.. Publicado em: 18/12/2017
-
11. Surface Characterization of NiTi Superelastic and Shape Memory Alloys After Electrolytic Polishing
For the biomedical application of NiTi alloys, an excellent surface finishing process is required to guarantee high corrosion resistance and biocompatibility, eliminating the allergenic and toxic effects associated with the release of nickel ions in the body. Electropolishing is a process that can reduce surface imperfections and form a thin protective layer
Mat. Res.. Publicado em: 09/11/2017
-
12. A New Experimental Device for Transapical Access of the Aortic and Mitral Valves as well as the Aorta in its Various Segments
Abstract Objective: To present the results of a new experimental device developed to facilitate the transapical access in endovascular treatment of structural heart diseases. It aims to reduce the risk of bleeding and complications in this type of access and demonstrate the device as a safe, fast and effective alternative. Methods: CorPoint is composed of
Braz. J. Cardiovasc. Surg.. Publicado em: 2017-06