Thermal Mapping
Mostrando 1-12 de 50 artigos, teses e dissertações.
-
1. Bioclimatic zoning and trend analysis applied to broilers
RESUMO O objetivo do presente trabalho foi estabelecer o zoneamento bioclimático por meio do índice de temperatura e umidade (ITU), considerando-se um período histórico e um cenário futuro, de forma a representar o ambiente térmico para criação de frangos de corte no estado de Minas Gerais. Foi utilizada uma série histórica (1976 - 2014) de ITU mí
Arq. Bras. Med. Vet. Zootec.. Publicado em: 28/10/2019
-
2. Effect of Nitrogen Addition to Shielding Gas on Cooling Rates and in the Microstructure of Thin Sheets of Duplex Stainless Steel Welded by Pulsed Gas Tungsten Arc Welding Process
The effect of the nitrogen content in the shielding gas and its effect on temperature distributions at the welded zone of thin sheets of duplex stainless steel have been evaluated. The duplex stainless steels have many features due to unique microstructural combination of austenite and ferrite grains. The phase balance can be easily shifted depending on the
Mat. Res.. Publicado em: 26/08/2019
-
3. COMPARISON BETWEEN ABSOLUTE AND RELATIVE POSITIONAL ACCURACY ASSESSMENT - A CASE STUDY APPLIED TO DIGITAL ELEVATION MODELS
Resumo Este artigo apresenta um estudo comparativo entre os métodos absoluto e relativo para a avaliação de acurácia posicional altimétrica de Modelos Digitais de Elevação (MDE). Para o embasamento teórico desta pesquisa, foram apresentadas as definições de acurácia (exatidão) e precisão, bem como conceitos relativos à acurácia posicional abso
Bol. Ciênc. Geod.. Publicado em: 18/04/2019
-
4. Thermal environment of masonry-walled poultry house in the initial life stage of broilers
RESUMO Objetivou-se com esta pesquisa monitorar e avaliar o ambiente térmico e realizar o mapeamento térmico completo das variáveis temperatura do ar, umidade relativa do ar e índice de temperatura e umidade de aviário para frangos de corte. A pesquisa foi conduzida durante inverno, no Brasil, em aviário comercial, com fechamento completo em alvenaria
Rev. bras. eng. agríc. ambient.. Publicado em: 2019-03
-
5. Relationship Between Aluminum-Rich/Intermetallic Phases and Microhardness of a Horizontally Solidified AlSiMgFe Alloy
An experimental study with an A356-AlSiMgFe alloy was developed to evaluate the microhardness performance in the microstructure resulting of an unsteady-state horizontal solidification process. The Al-7wt%Si-0.3wt%Mg-0.15wt%Fe alloy was elaborated and directionally solidified in a water-cooled horizontal solidification device. In order to experimentally dete
Mat. Res.. Publicado em: 23/11/2018
-
6. Microscopía fototérmica para el estudio de transformaciones de fase
ABSTRACT A novel system allowing a high spatial resolution mapping of the thermal diffusivity as a function of temperature up to 1800 K is presented. The system is based on a photothermal technique recently developed by the group, consisting in measuring, with a probe laser beam, the curvature induced by local heating with a modulated pump laser. A microscop
Matéria (Rio J.). Publicado em: 19/07/2018
-
7. Evolución microestructural durante el envejecimiento a alta temperatura de una aleación 35Ni-25Cr-Nb
ABSTRACT The dendritic-type microstructure of the 35Ni-25Cr-Nb alloy, in the as-cast condition, consists of an austenitic matrix and two types of eutectic primary carbides; Nb-rich MC type and Cr-rich M23C6 type both presents in interdendritic edges and grain boundaries. During aging at 800ºC for different times, M23C6 type secondary carbides precipitate in
Matéria (Rio J.). Publicado em: 19/07/2018
-
8. CLIMATE CHANGE AND RURAL WORKERS THERMAL COMFORT: HISTORICAL AND FUTURE IMPACTS
Abstract The aim of the present research was to propose a bioclimatic mapping to classify the thermal comfort and discomfort of rural workers within the state of Minas Gerais, considering historical and future scenarios. Monthly historical series (1976-2014) of minimum, mean and maximum temperature-humidity index (THI), determined through the values of air t
Eng. Agríc.. Publicado em: 2018-04
-
9. Assessing Collaboration and Knowledge Flow on Coatings of Metallic Glasses Obtained From Thermal Spraying Processes Using Bibliometrics and Science Mapping
Coatings of amorphous metallic alloys can be obtained using different thermal spraying processes, such as HVOF, plasma spraying, cold spraying and others. Although many studies focused on investigating scientific issues concerning apply amorphous metallic coatings using thermal spraying, less attention have been paid to evaluate how research institutes and c
Mat. Res.. Publicado em: 13/11/2017
-
10. Sensoriamento remoto aplicado à análise temporal da relação uso da terra/temperatura e albedo de superfície na bacia do Rio Vieira no Norte de Minas Gerais
This study aimed to analyze with the help of TM data - Landsat 5, the relationship between the changes in land use and the variation of temperature and surface albedo, during period winter in basin River Vieira for the years 1985, 1995 and 2010. The choice of river basin Vieira is justified because this area, located in the North of Minas Gerais, was the sce
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 16/03/2012
-
11. Influência dos polieletrólitos na resposta eletroquímica de filmes automontados contendo nanotubos de carbono para aplicação em nanomedicina / Influence the polyelectrolytes on the electrochemical response of layer-by-layer films containing carbon nanotubes for applications in nanomedicine
Carbon Nanotubes (CNTs) are cylindrical carbon nanostructures exhibiting excellent electrical, thermal, optical and mechanical properties. The immobilization of CNTs in nanostructured thin films in conjunction with polymers using the Layer-by-Layer (LbL) technique provides a new alternative for development of nanocomposites to be used as sensors and biosenso
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 20/06/2011
-
12. Levantamento de mapas operacionais de transferência metálica para soldagem MIG/MAG de aço ao carbono na posição plana / Operational Mapping of Metal Transfers for Carbon Steel Gas Metal Arc Welding in Flat Position
The MIG/MAG process is nowadays the most important welding process. This is due to its high production capacity, characteristic searched by industries to improve their manufacturing processes. Thus, due to this process relevance, development of tools that helps to understanding how it works comes out as necessary, especially in relation to proper welding set
Publicado em: 2010