Thermal Physical Properties
Mostrando 1-12 de 280 artigos, teses e dissertações.
-
1. BIODEGRADABLE SODIUM CARBOXYMETHYL CELLULOSE MEMBRANES CONTAINING MELALEUCA ESSENTIAL OILS FOR WOUND CARE MATERIAL
NaCMC is a biocompatible polymer that can be crosslinked with citric acid to form a gel matrix. Melaleuca oils have antimicrobial and anti-inflammatory properties with potential for wound healing. The goal of this work was to investigate the characteristics of NaCMC-Melaleuca oils gels. The gels were characterized by FTIR, TGA, mechanical analysis, and in vi
Química Nova. Publicado em: 2022
-
2. ERRATA
Abstract After natural fermentation and solar drying, sour cassava starch acquires expansion property. Traditionally, solar drying occurs without protection, and consequently physical contamination can arise. Thus, the aim of this study was to produce sour cassava starch using a low-cost solar dryer to prevent contamination, whilst retaining the expansion pr
Rev Bras Med Esporte. Publicado em: 2021-06
-
3. Evaluation of the properties of a foamed geopolymer developed with different types of metakaolin
Abstract The physical and mechanical properties of foamed geopolymers were determined. The geopolymers were made with two different metakaolins (from Metacaulim do Brasil - MB, and Pantano Grande/RS - MPG) as precursors, with NaOH and Na2SiO3 as activators, and with the addition of foam, which was produced with the foaming agent diethanolamide of coconut fat
Cerâmica. Publicado em: 2021-06
-
4. Traditional sour cassava starch obtained with alterations in the solar drying stage
Abstract After natural fermentation and solar drying, sour cassava starch acquires expansion property. Traditionally, solar drying occurs without protection, and consequently physical contamination can arise. Thus, the aim of this study was to produce sour cassava starch using a low-cost solar dryer to prevent contamination, whilst retaining the expansion pr
Food Sci. Technol. Publicado em: 2021-06
-
5. Structure-Physical Properties Relationship of Eutectic Solvents Prepared from Benzyltriethylammonium Chloride and Carboxylic Acids
Deep eutectic solvents (DESs) have attracted the attention of the researchers as alternative solvents due to desirable properties such as easy preparation and high thermal stability. In this work, it was reported the preparation of five DESs from benzyltriethylammonium chloride (BTEAC) as quaternary ammonium salt (QAS) and carboxylic acids (oxalic, malonic o
J. Braz. Chem. Soc.. Publicado em: 2021-03
-
6. PROPRIEDADES DE PROTEÇÃO TÉRMICA DO CARBETO DE SILÍCIO EM REVESTIMENTOS CERÂMICOS
In recent years, research on the development of protective materials has expanded significantly in order to find efficient and economically viable solutions for application in various industrial segments. Among these materials, those aimed at protecting metallic substrates against high temperatures that end up causing corrosive processes, stand out due to th
Quím. Nova. Publicado em: 2021-01
-
7. ASPECTOS ESTRUTURAIS DE ESFERAS DE QUITOSANA/PVA RETICULADAS COM GLUTARALDEÍDO SUBMETIDAS A DIFERENTES TRATAMENTOS TÉRMICOS
Chitosan is a biopolymer derived from chitin and the most abundant polysaccharide in nature after cellulose. This biopolymer has been applied in different areas due its biodegradability and biocompatibility properties. Modifications of chitosan structure by cross-linking chemical agents can alter its physical, chemical, and morphological characteristics. The
Quím. Nova. Publicado em: 2020-09
-
8. BEHAVIOR OF THERMALLY MODIFIED WOOD TO BIODETERIORATION BY XYLOPHAGE FUNGI
ABSTRACT Thermally modified wood undergoes chemical, physical, and mechanical modifications, resulting in changes in resistance to wood biodegrading agents. The objective of this study was to evaluate the resistance to biodeterioration of thermally modified wood by the industrial process VAP HolzSysteme® of Eucalyptus grandis, Pinus taeda and Tectona grandi
CERNE. Publicado em: 2020-09
-
9. PHYSICAL AND THERMAL PROPERTIES OF EUCALYPTUS WOOD CHARCOAL.
ABSTRACT The knowledge of the physical and thermal properties of eucalyptus charcoal is of fundamental importance in the design of equipment and development of cooling technologies. However, literature about physical properties for eucalyptus wood charcoal is largely unavailable, especially the thermal and aerodynamic properties, for the same material. The a
CERNE. Publicado em: 2020-03
-
10. Polyurethane/poly (Ionic Liquids) Cellulosic Composites and their Evaluation for Separation of CO2 from Natural Gas
The development of both versatile and inexpensive sorbents for CO2/CH4 separation has become one of the greatest challenges to the environment and natural gas processing. This study reports the preparation and characterization of polyurethane (PU)/ cellulose based poly(ionic liquid)(CPIL) composites for CO2/CH4 separation. PU matrix was reinforced with CPIL
Mat. Res.. Publicado em: 20/01/2020
-
11. Study about concrete with recycled expanded polystyrene
Resumo O concreto leve obtido com adição de partículas de poliestireno expandido (EPS) é conhecido como concreto com EPS. Estudaram-se neste trabalho as propriedades de concretos com adição de EPS para uso em paredes estruturais. O EPS por ser um material produzido em larga escala e possuir baixa densidade, produz um grande volume de resíduos. Esses r
Rev. IBRACON Estrut. Mater.. Publicado em: 13/12/2019
-
12. PHYSICAL, MECHANICAL AND THERMAL BEHAVIOUR OF ADOBE STABILIZED WITH THE SLUDGE OF WASTEWATER TREATMENT PLANTS
ABSTRACT The need for treated water is essential for life. With the constant increase in population, the most common way to purify surface water is through conventional water treatment plants (WTPs). The high volume of residue (sludge) generated in this process is most often returned to the catchment site, negatively affecting the ecosystem. The sludge of WT
Eng. Agríc.. Publicado em: 09/12/2019