Thermal Treatment And Chemical Treatment
Mostrando 1-12 de 139 artigos, teses e dissertações.
-
1. Yellow Mombin (Spondias mombin L.) Seeds from Agro-Industrial Waste as a Novel Adsorbent for Removal of Hexavalent Chromium from Aqueous Solutions
The objective of this study was to develop a low-cost and eco-friendly adsorbent from agro-industrial waste for the removal of hexavalent chromium in the aqueous medium. The adsorbent (BMC) produced from yellow mombin (Spondias mombin L.) seeds was characterized by the determination of the chemical composition, thermal analysis (thermogravimetric (TG) analys
J. Braz. Chem. Soc.. Publicado em: 2021-02
-
2. BEHAVIOR OF THERMALLY MODIFIED WOOD TO BIODETERIORATION BY XYLOPHAGE FUNGI
ABSTRACT Thermally modified wood undergoes chemical, physical, and mechanical modifications, resulting in changes in resistance to wood biodegrading agents. The objective of this study was to evaluate the resistance to biodeterioration of thermally modified wood by the industrial process VAP HolzSysteme® of Eucalyptus grandis, Pinus taeda and Tectona grandi
CERNE. Publicado em: 2020-09
-
3. ASPECTOS ESTRUTURAIS DE ESFERAS DE QUITOSANA/PVA RETICULADAS COM GLUTARALDEÍDO SUBMETIDAS A DIFERENTES TRATAMENTOS TÉRMICOS
Chitosan is a biopolymer derived from chitin and the most abundant polysaccharide in nature after cellulose. This biopolymer has been applied in different areas due its biodegradability and biocompatibility properties. Modifications of chitosan structure by cross-linking chemical agents can alter its physical, chemical, and morphological characteristics. The
Quím. Nova. Publicado em: 2020-09
-
4. EVALUATION OF POLY(VINYL ALCOHOL) ADDITION EFFECT ON NANOFIBRILLATED CELLULOSE FILMS CHARACTERISTICS
ABSTRACT In this study, based on the mechanical shear treatment, the cellulosic pulp was fibrillated in nanofibrils dispersed in aqueous suspension. Nanofibrillated Cellulose (NFC) matrix - Polyvinyl Alcohol (PVA) nanocomposite films’ were prepared by casting from NFC/PVA suspension mixtures. The thermal and mechanical properties of the obtained films were
CERNE. Publicado em: 2020-03
-
5. BIODIESEL SYNTHESIS FROM WASTE COOKING OIL USING A VARIETY OF WASTE MARBLE AS HETEROGENEOUS CATALYSTS
Abstract The research article is based on biodiesel synthesis by the transesterification of waste cooking oil with methanol in the presence of heterogeneous catalysts prepared from different marble. Eight samples of marble were successfully converted into potential catalysts by calcination. The thermal treatment of waste marbles at 300oC-1000oC converted the
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
6. Production of Carbon Foams from Rice Husk
The production of a material with rigid, multifunctional three-dimensional porous structure at a low cost is still challenging to date. In this work, a light and rigid carbon foam was prepared using rice husk as the basic element through a simple fermentation process followed by carbonization. For the fermentation process, the amount of biological yeast (7.5
Mat. Res.. Publicado em: 11/11/2019
-
7. THERMAL BEHAVIOR OF FOREST BIOMASS WASTES PRODUCED DURING COMBUSTION IN A BOILER SYSTEM
RESUMO Durante a queima da biomassa em sistemas industriais haverá a formação de resíduos contendo cinzas e carbono residual, cujo teor será variável em função da eficiência e dos parâmetros de operação das câmaras de combustão. A caracterização destes resíduos é ferramenta essencial para visualizar a sua potencialidade de reuso energético
Rev. Árvore. Publicado em: 23/09/2019
-
8. Mechanical properties of mortar produced with the replacement of natural sand by scheelite residue
Resumo O resíduo gerado pelas atividades industriais representa um custo, já que os geradores são responsáveis pela sua gestão, transporte, tratamento e disposição. O estado do Rio Grande do Norte, Brasil, é o maior produtor de resíduos de scheelita. O objetivo desta pesquisa foi caracterizar este resíduo de mineração, identificar sua similaridad
Cerâmica. Publicado em: 15/08/2019
-
9. Influence of Zirconia-Coated Bioactive Glass on Gingival Fibroblast Behavior
Resumo O objetivo deste estudo foi o desenvolvimento de um recobrimento de vidro bioativo sobre a zircônia (Zr) para modular o fenótipo de fibroblastos gengivais. Para este propósito, partículas de Biosilicato® (6 mg/mL) em um veículo a base de água/álcool isopropílico (1:1) foram aplicadas sobre discos de zircônia seguido por tratamento térmico a
Braz. Dent. J.. Publicado em: 22/07/2019
-
10. Advanced Oxidation Processes to the Remediation of Liquid Residue from the Thermal Treatment of Oily Sludge
This work reports the remediation of a liquid residue derived from the thermal treatment of petrochemical residues by advanced oxidation processes. Firstly, degradation studies of phenol aqueous solutions by heterogeneous photocatalysis, Fenton, and photo-Fenton were conducted. Fenton processes showed a higher efficiency, mainly in the UVA photo-assisted mod
J. Braz. Chem. Soc.. Publicado em: 04/07/2019
-
11. Simple and Low-Cost Thermal Treatments on Direct Resin Composites for Indirect Use
Resumo O objetivo deste estudo foi avaliar a influência de três tratamentos térmicos adicionais de baixo custo, disponíveis no consultório dentário, nas propriedades mecânicas, químicas e ópticas de uma resina composta fotoativada indicada para restaurações diretas porém usada como restaurador indireto. A resina composta direta TPH3 (Dentsply) fo
Braz. Dent. J.. Publicado em: 03/06/2019
-
12. Effects of mercerization in the chemical and morphological properties of amazon piassava
Abstract The objective of this work was to investigate the effects of mercerization on chemical, morphological and thermal properties of Amazon Piassava Fibers. The effect of this treatment was studied using XRF, SEM, XRD and TGA. The fibers have been treated in 5% and 10% NaOH for 60 min. The XRF results for treated and untreated fibers showed that there i
Polímeros. Publicado em: 18/03/2019