Turbines
Mostrando 1-12 de 112 artigos, teses e dissertações.
-
1. INCREASED ENERGY COGENERATION IN THE SUGAR-ENERGY SECTOR WITH THE USE OF SUGARCANE STRAW, ELECTRIFICATION OF DRIVES, AND HIGH-DRAINAGE ROLLERS IN THE EXTRACTION
ABSTRACT The sugar-energy sector stands out in the production of electrical energy in the Brazilian energy matrix. The updating of Law 9,427 allowed increasing the limit of power injected in the transmission or distribution systems of existing projects from 30 to 50 MW, encouraging studies of expansion and/or implementation of new cogeneration projects. This
Eng. Agríc.. Publicado em: 2020-04
-
2. Impacto nas Propriedades Mecânicas e Tensões Residuais do Material ASTM A572 Grau 50 Soldado por Arco Submerso com Alívio de Tensões Térmico
Resumo O aço ASTM A572 Grau 50 é utilizado na fabricação de conjuntos soldados para aerogeradores, por este motivo, a realização de alívio de tensões é de grande importância para correção dos impactos causados pelos processos de soldagem, bem como, o conhecimento das propriedades finais obtidas com a realização deste processo. O objetivo desse
Soldag. insp.. Publicado em: 02/12/2019
-
3. Estudo do envelhecimento e do tratamento térmico de rejuvenescimento da superliga GTD111
RESUMO A superliga de níquel GTD111 é comumente utilizada na fabricação de pás de turbinas a gás, destinadas a geração de energia e aplicações aeronáuticas. O presente estudo investiga o comportamento desta superliga “como fornecida” pelo fabricante e previamente tratada termicamente à fim de diminuir o tamanho de γ’ e transformá-lo de mo
Matéria (Rio J.). Publicado em: 16/09/2019
-
4. Escoamento Atmosférico sobre uma Colina Isolada Revelado a Partir de Dados de um Veículo Aéreo não Tripulado (VANT)
Resumo Este artigo é uma contribuição do Projeto “uso de VANT para prospecção eólica em sistemas aquáticos”, que consistiu num esforço multi-instrumental e multi-institucional para estudar a camada limite atmosférica influenciada por extensos corpos d’água e pelas feições do entorno como colinas, rampas e mudanças abruptas de rugosidade. O
Rev. bras. meteorol.. Publicado em: 05/08/2019
-
5. Vibration control device for steel tubular towers of Horizontal Axis Wind Turbines
Abstract This paper presents and discusses the design of a vibration control device for a 120 m high steel tubular tower of onshore Horizontal Axis Wind Turbine (HAWT). The tower is modeled using beam (own code), and shell and solid finite elements (via ANSYS). The Dynamic Vibration Absorber (DVA) is designed to be attached to the tower top, aiming to analyz
Lat. Am. j. solids struct.. Publicado em: 10/07/2019
-
6. Effect of Boundary Layer and Rotor Speed on Broadband Noise from Wind Turbines
ABSTRACT: Trailing edge surface of aerofoil is an important source of broadband aerodynamic noise production. In this paper, three aerofoil self-noise mechanisms from turbulent boundary layer near trailing edge surface are studied. Numerical computations were performed for a three bladed 2 MW horizontal axis upwind turbine of blade length 37 m and source hei
J. Aerosp. Technol. Manag.. Publicado em: 03/06/2019
-
7. Trajectory Optimization of Launch Vehicles Using Object-oriented Programming
ABSTRACT: The aim of this study is to model launch vehicles with focus on 3-DOF trajectory optimization using a modular approach. Despite the large number of operational launch vehicles, they usually consist of basic components and subsystems. In other words, a launch vehicle is an assembly of stages, which in turn is divided into propellant system and engin
J. Aerosp. Technol. Manag.. Publicado em: 13/09/2018
-
8. Electrochemical corrosion characterization of nickel aluminides in acid rain
ABSTRACT Nickel aluminides have been extensively studied in recent decades to replace superalloys, in some components of aircraft turbines, because they have excellent corrosion resistance. Many industrial cities have the problem of air pollution, which has forced the study of the degradation of these alloys in the presence of acid rain. The aim of this work
Matéria (Rio J.). Publicado em: 19/07/2018
-
9. Microstructure and Mechanical Properties of ASTM A743 CA6NM Steel Welded by FCAW Process
CA6NM steel is widely used in the manufacture of hydraulic turbines metallic parts, due to its resistance to corrosion and cavitation damage, combined with good weldability and fatigue properties. However, welding of this type of steel is complex and to ensure a minimum residual stress after welding it is necessary perform a post welding heat treatment (PWHT
Mat. Res.. Publicado em: 21/09/2017
-
10. Creep Parameters and Dislocation Substructure in AISI 316 Austenitic Stainless Steel From 600ºC to 800ºC
Stainless steels are well known by their corrosion resistance. The austenitic types, in particular, are also applied as structural components in engineering systems operating at high temperatures such as nuclear reactors, petrochemical furnaces and turbines. For these applications operational temperatures may go up to 800ºC. Under constant load applications
Mat. Res.. Publicado em: 06/07/2017
-
11. Numerical Study of Wake Characteristics in a Horizontal-Axis Hydrokinetic Turbine
ABSTRACT Over the years most studies on wake characteristics have been devoted to wind turbines, while few works are related to hydrokinetic turbines. Among studies applied to rivers, depth and width are important parameters for a suitable design. In this work, a numerical study of the wake in a horizontal-axis hydrokinetic turbine is performed, where the ma
An. Acad. Bras. Ciênc.. Publicado em: 01/12/2016
-
12. Combined Cycle Performance Evaluation and Dynamic Response Simulation
ABSTRACT Power plants operating in combined cycle present higher thermal efficiency (over 60%) and increased power generation when compared to traditional simple cycles, such as gas or steam turbines operating alone. Considering that the power plant evaluated in this paper is already operational, a further development concerning to the power plant control sy
J. Aerosp. Technol. Manag.. Publicado em: 2016-12