Two Phase Flows
Mostrando 1-12 de 52 artigos, teses e dissertações.
-
1. Numerical Simulation of Two-Phase Flows in Heterogeneous Porous Media
RESUMO Neste trabalho apresentamos simulações numéricas tridimensionais do escoamento bifásico (água-óleo) em meios porosos com o objetivo de analisar a influência das heterogeneidades nos campos de porosidade e permeabilidade e, principalmente, suas relações, sobre o fenômeno conhecido na literatura como dedos viscosos (viscous fingering). Para is
TEMA (São Carlos). Publicado em: 2020-08
-
2. Wall function treatment for bubbly boundary layers at low void fractions
Abstract The present work investigates the role of different treatments of the lower boundary condition on the numerical prediction of bubbly flows. Two different wall function formulations are tested against experimental data obtained for bubbly boundary layers: (i) a new analytical solution derived through asymptotic techniques and (ii) the previous formul
An. Acad. Bras. Ciênc.. Publicado em: 2018-03
-
3. SELF-SIMILARITY OF VERTICAL BUBBLY JETS
AbstractAn integral model for vertical bubbly jets with nearly monodisperse bubble sizes is presented. The model is based on the Gaussian type self-similarity of mean liquid velocity, bubble velocity and void fraction, as well as on functional relationships for initial liquid jet velocity and radius, bubble diameter and relative velocity. Adjusting the model
Braz. J. Chem. Eng.. Publicado em: 2015-06
-
4. SIMULATION OF INTERMITTENT FLOW IN VERTICAL PIPES USING THE TWO-FLUID MODEL WITH DIFFERENT CLOSURE PARAMETERS / SIMULAÇÃO DO REGIME INTERMITENTE EM TUBULAÇÕES VERTICAIS UTILIZANDO O MODELO DE DOIS FLUIDOS COM DIFERENTES RELAÇÕES DE FECHAMENTO
Intermittent two phase flows are characterized by a succession of liquid slugs separated by bubbles of different sizes, with varying frequency. The prediction of this type of flow is very important, since it can be found in several industrial applications. In the present work, studies of intermittent flows in vertical pipes are performed, employing the Two F
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 13/09/2012
-
5. Influência da geometria da nanocarga na estruturação, orientação e propriedades de filmes tubulares de nanocompósitos de PA6 / Influence of the nanoparticles shape on the structure, orientation and properties of pa6 nanocomposites blown films
The structure and morphology of polymers and consequently their properties are dependent on the processing conditions. During the blown film process, high shear and elongational flows can induce a preferred orientation of the polymer chains; controlling the process conditions, it is possible to obtain films with anisotropic properties. Polymeric nanocomposit
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 13/06/2012
-
6. Incorporação de energia na vida útil de uma colhedora autopropelida de cana-de-açúcar / Energy embodiment in life cycle of a self-propelled sugarcane harvester
The energy subject is one of the main challenges of 21st century. The geopolitical and environment aspects, they are concern sources to the current economic model. Brazil presents advantages in comparison to the world due to the use of renewable energy. Since 2007, products from the sugarcane have assumed the first place as a renewable source in the Brazilia
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 23/11/2011
-
7. NUMERICAL ANALYSIS OF THE FLOW OF EMULSION THROUGH STRAIGHT AND CONSTRICTED CAPILLARIES / ANÁLISE NUMÉRICA DO ESCOAMENTO DE EMULSÕES ATRAVÉS DE CAPILARES RETOS E CAPILARES COM GARGANTA
Emulsion can be used as a mobility control agent in enhanced oil recovery methods in order to achieve a more efficient sweep of the reservoir. The application of such technique requires full understanding of how emulsions flow in a porous material. The macroscopic flow behavior can be determined based on the pore scale flow, at which emulsions cannot be trea
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/09/2011
-
8. Análise do modelo de mistura aplicado em escoamentos isotérmicos gás-líquido / Analysis of mixture model applied in gas-liquid isothermals flows
Gas-liquid flows are often found in nature as well as in various industrial applications. In the oil production, for example, in natural or artificial lift systems (continuous or intermittent gas-lift), gas and oil flow simultaneously in pipes. The prediction of gas-liquid behavior becomes necessary for technical and economic viability of many industrial pro
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 13/07/2011
-
9. A new correlation for single and two-phase flow pressure drop in round tubes with twisted-tape inserts
Twisted-tape inserts are frequently used in heat exchangers as a passive and inexpensive heat transfer enhancement method. However, their use results not only heat transfer coefficient increments, but also pressure drop penalties. The present study analyses the literature on single and two-phase frictional pressure drop inside tubes with twisted-tape inserts
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2011
-
10. Experimental investigation of horizontal gas-liquid slug flow by means of wire-mesh sensor
The monitoring and visualization of two-phase flow is of great importance either from technical/practical point of view for process control and supervision or from scientific/theoretical point of view, for the understanding of physical phenomenon. A wire-mesh sensor was applied to experimentally investigate two-phase horizontal pipe flow. Furthermore, some p
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2011
-
11. Simulação do escoamento monofásico em um estágio de uma bomba centrífuga utilizando técnicas de fluidodinâmica computacional
Oil production and exploration techniques have evolved in the last decades in order to increase fluid flows and optimize how the required equipment are used. The base functioning of Electric Submersible Pumping (ESP) lift method is the use of an electric downhole motor to move a centrifugal pump and transport the fluids to the surface. The Electric Submersib
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 17/12/2010
-
12. A comparison of hyperbolic solvers II: ausm-type and Hybrid Lax-Wendroff-Lax-Friedrichs methods for two-phase flows
Riemann-solver based schemes are difficult and sometimes impossible to be applied for complex flows due to the required average state. Other methods that do not use Riemann-solvers are best suited for such cases. Among them, AUSM+, AUSMDV and the recently proposed Hybrid Lax-Friedrichs-Lax-Wendroff (HLFW) have been extended to two-phase flows. The eigenstruc
Brazilian Journal of Chemical Engineering. Publicado em: 2010-03