Zirconia Abutments
Mostrando 1-10 de 10 artigos, teses e dissertações.
-
1. Implant Volume Loss, Misfit, Screw Loosening, and Stress In Custom Titanium and Zirconia Abutments
Resumo O objetivo neste estudo foi verificar o efeito da diminuição de volume do implante, desajuste vertical entre o pilar e plataforma protética, torque de afrouxamento do parafuso protético e distribuição da tensão no parafuso em pilares de titânio e zircônia. Dez pilares personalizados de cada material foram fresados e conectados aos implantes d
Braz. Dent. J.. Publicado em: 2020-08
-
2. Can low-fusing glass application affect the marginal misfit and bond strength of Y-TZP crowns?
Abstract To evaluate the effect of different surface treatments on the marginal misfit and retentive strength between Y-TZP crowns and an epoxy resin. Forty (40) epoxy resin (G10) abutments (height: 5mm, conicity: 60, finish line: large chamfer) with equal dimensions were milled and included in polyurethane to simulate the periodontal ligament. Next, 40 Y-TZ
Braz. oral res.. Publicado em: 07/05/2018
-
3. Evaluation of the adaptation of zirconia-based fixed partial dentures using micro-CT technology
The objective of the study was to measure the marginal and internal fit of zirconia-based all-ceramic three-unit fixed partial dentures (FPDs) (Y-TZP - LAVA, 3M-ESPE), using a novel methodology based on micro-computed tomography (micro-CT) technology. Stainless steel models of prepared abutments were fabricated to design FPDs. Ten frameworks were produced wi
Braz. oral res.. Publicado em: 2013-09
-
4. Mechanical testing of thin-walled zirconia abutments
Although the use of zirconia abutments for implant-supported restorations has gained momentum with the increasing demand for esthetics, little informed design rationale has been developed to characterize their fatigue behavior under different clinical scenarios. However, to prevent the zirconia from fracturing, the use of a titanium connection in bi-componen
J. Appl. Oral Sci.. Publicado em: 2013-02
-
5. Avaliação estrutural e biológica de coroas sobre implante confeccionadas com pilares de zircônia em região estética. / Structural and biological crowns on implant abutments made from zirconia region in aesthetics.
This prospective in vivo study has as main objective to evaluate the structural and biological performance of single-tooth implant supported-zirconia restoration in aesthetic region. Sixteen subjects were selected for the placement of thirty-one implants in aesthetic region. For the sample group fifteen single-tooth implants were fabricated. Zirconia abutmen
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 26/03/2012
-
6. Estudo clínico controlado randomizado boca-dividida de próteses implantossuportadas unitárias sobre pilares metálicos e de zircônia em região estética: resultados clínicos preliminares após 110 dias em função. / Clinical randomized controlled split-mouth implant-prosthesis unit on metal and zirconia abutments in aesthetic region: preliminary clinical results after 110 days function.
O objetivo deste estudo controlado, prospectivo, longitudinal, randomizado tipo boca-dividida foi avaliar os parâmetros clínicos peri-implantares de próteses unitárias implantossuportadas em região anterior e posterior confeccionadas sobre pilares de zircônia versus metálico. Foram selecionados 16 indivíduos para instalação de 35 implantes dentári
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/02/2012
-
7. Influência do método de confecção de pilares de zircônia e metálicos antes e após ciclagem mecânica na avaliação da interface implante/pilar / The influence of metal and zirconia abutments before and after mechanical cycling in the evaluation of the interface implant / abutment
Objetivos: O presente estudo avaliou e comparou os diferentes tipos de pilares protéticos em relação ao desajuste cervical vertical pilar/implante quanto ao tipo de material utilizado em sua confecção, respectivamente, níquel-cromo-titânio e zircônia; ao tipo de pilar calcinável utilizado, respectivamente, UCLA pré-calcinável com cinta metálica p
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/09/2011
-
8. Desadaptação marginal na interface de pilares cerâmicos procera parafusados a diferentes sistemas de implantes. / Misfit at the interface of procera ceramic abutments and different implant systems.
Embora sejam fabricados pela Nobel Biocare, as vantagens mecânicas e estéticas dos pilares cerâmicos personalizados Procera têm levado à sua utilização em associação com outros sistemas de implantes compatíveis com o sistema Bränemark. Estudos chamam a atenção para o fato de que a associação de componentes de empresas diferentes das dos fabric
Publicado em: 2008
-
9. Caracteristicas de superficies, adsorção de proteinas e aderencia bacteriana em diferentes materiais odontologicos / Surface characteristics, proteins adsorption and bacterial adherence on different dental materials
The use of osseointegrated implants for replacing missing teeth is an important alternative in current dentistry. One of the most important conditions, which relates to the future success of implant procedures, is provided by the surface properties of the implant and its prosthetic abutments. Since these components penetrate through the gingival mucosa and a
Publicado em: 2006
-
10. Mechanical properties of alumina-zirconia composites for ceramic abutments
The need for new materials to substitute injured or damaged parts of the human body has led scientists of different areas to investigate bioceramics since the 70's, when other materials in use started to show rejection problems. Ceramics show some advantages like being the material that best mimics the bone tissue, although present low toughness when compare
Materials Research. Publicado em: 2004-12